Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T09:04:34.729Z Has data issue: false hasContentIssue false

A numerical study of the application of vane and air-jet vortexgenerators

Published online by Cambridge University Press:  04 July 2016

C. Küpper
Affiliation:
Department of Aeronautical, Civil and Mechanical Engineering City University, London, UKDepartment of Meteorology, University of Reading, Reading, UK
F. S. Henry
Affiliation:
Department of Aeronautical, Civil and Mechanical Engineering City University, London, UK

Abstract

The objective of the work described in this paper was to identify differences inthe flow fields immediately downstream of air-jet and vane vortex generators.The flows were assumed to be incompressible and fully turbulent and were solvedusing the finite volume, Navier-Stokes code CFX 4 (CFDS, AEA Technology,Harwell) on a non-orthogonal, body-fitted grid using thek-ε turbulence model and standard wall functions.The behaviour of the longitudinal vortices produced by the vanes and air jets ispresented in terms of stream-wise and cross-stream velocity profiles,circulation and peak vorticity decay, peak vorticity paths in the cross-streamand streamwise direction, cross-stream vorticity profiles, and cross-streamdistribution of shear stress. The predicted results show that the vanes and airjets considered produce vortices with significantly different circulationstrengths, but that the enhancement of skin friction was of similar magnitude inboth cases.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2002 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable