Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T07:53:00.031Z Has data issue: false hasContentIssue false

On the design of three-dimensional wind tunnel contractions

Published online by Cambridge University Press:  04 July 2016

J. H. Downie
Affiliation:
Department of Mechanical & Production Engineering, Brighton Polytechnic
R. Jordinson
Affiliation:
Department of Mechanical & Production Engineering, Brighton Polytechnic
F. H. Barnes
Affiliation:
Department of Mechanical & Production Engineering, Brighton Polytechnic

Extract

A method is given for the calculation of incompressible inviscid flow through non-axisymmetric contracting ducts with rectangular cross-sections. The method is based on a finite difference approximation to Laplace's equation and solved by the method of successive over relaxation. In an attempt to provide practical criteria for the design of such contractions, the flows through a series of contraction shapes were calculated, each shape being based on a pair of matched elliptic arcs. This permitted choice of such parameters as length, local (ie two-dimensional) contraction ratio, position and magnitude of the maximum slope. It was found that reducing the length of the contraction also reduced its effective length, although increasing the effects of overshoot and undershoot. This could be compensated for by designing a contraction with a steep maximum slope which with associated low curvatures at entrance and exit reduced the values of overshoot and undershoot. The axial positions of maximum slope on wall and roof should be the same.

The predictions of the numerical method were tested against experiment and, in general, satisfactory comparisons were obtained.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1984 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable