Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T13:49:12.534Z Has data issue: false hasContentIssue false

On the effect of wing taper and sweep direction on leading edge transition

Published online by Cambridge University Press:  04 July 2016

D. I. A. Poll
Affiliation:
Aerodynamics Division, College of Aeronautics, Cranfield Institute of Technology, Cranfield, Bedford
D. J. Paisley
Affiliation:
Aerodynamics Division, College of Aeronautics, Cranfield Institute of Technology, Cranfield, Bedford

Summary

An experimental study has been made of the conditions necessary to produce transition in a swept attachment-line boundary layer which is subjected to disturbances from trip wires of various sizes. The boundary layer considered is that formed on a long, untwisted, tapered wing which has been tested in both the backward swept and forward swept configurations. Results from these tests are compared with previous work on an untapered model. Some important similarities and some puzzling differences have been found. Finally consideration is given to the practical implications of this work. It is suggested that a forward swept wing may be capable of supporting a laminar attachment-line flow at a much higher free-stream Reynolds number than a corresponding swept-back wing.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1985 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable