Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T12:42:42.274Z Has data issue: false hasContentIssue false

On the interaction of a racing car front wing and exposed wheel

Published online by Cambridge University Press:  27 January 2016

S. Diasinos*
Affiliation:
Macquarie University, North Ryde, New South Wales, Australia
G. Doig*
Affiliation:
School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, New South Wales, Australia
T. J. Barber*
Affiliation:
School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, New South Wales, Australia
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A numerical investigation of generic open-wheel racing car wing and wheel geometry has been conducted, using original sub-scale experimental data for validation. It was determined that there are three main interactions that may occur, identifiable by the path that the main and secondary wing vortices take around the wheel. Interaction ‘A’ occurs when the main and secondary wing vortices both travel outboard of the wheel; interaction ‘B’ is obtained when only the main wing vortex passes inboard of the wheel; while interaction ‘C’ sees both wing vortices travel inboard of the wheel. The different interactions are achieved when geometric changes to the wing affect the pressure distribution about the endplate, either by altering the magnitude of suction generated by the wing or by changing the locations of peak suction and vortices relative to the wheel’s stagnation regions. As a result, the influence that the wing and wheel have on each other – in comparison to the same bodies in isolation – varies, resulting in significant consequences for downforce and drag.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2014