Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T06:11:20.407Z Has data issue: false hasContentIssue false

On the Rolling Up of a Trailing Vortex Sheet

Published online by Cambridge University Press:  04 July 2016

G. J. Hancock*
Affiliation:
Department of Aeronautical Engineering, Queen Mary College, University of London

Extract

One of the best known results in finite wing theory, which is quoted in aerodynamic text books, states that the distance between two rolled up vortices behind a wing with an elliptic spanwise load distribution is sπ/2, where s is the wing semi-span. Within the framework of linear wing theory this result is correct. But it is of interest to enquire how this result is affected when the standard linear model becomes less valid, for example, at higher wing lift coefficients.

In this note, it is assumed that a continuous trailing vortex sheet rolls up into two discrete vortices. These two discrete vortices are assumed to have cores of finite radius; inside the cores the flow is taken to be solid body rotation, while the flow outside the cores is the standard irrotational vortex field. It is assumed that this rolling up process takes place far downstream of the finite wing which generates the trailing vorticity.

Information

Type
Fifth Reynolds-Prandtl Memorial Lecture
Copyright
Copyright © Royal Aeronautical Society 1970 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable