Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T22:39:10.852Z Has data issue: false hasContentIssue false

On the vortex created by multiple blades joined at a hub

Published online by Cambridge University Press:  03 February 2016

P. R. Spalart*
Affiliation:
Boeing Commercial Airplanes, Seattle, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Experimental studies often use several blades, joined on the centreline, to generate a vortex in a wind tunnel. The circulation profile of this vortex is non-trivial, and a rapid prediction method will facilitate the design of such devices. Prompted by an experiment of Beninati and Marshall, such a model was derived. It assumes a large number of narrow blades and small turning angles, and rests on a balance of angular momentum and on simple aerofoil function. It is claimed to be valid even close to the centreline, can be completed analytically, contains no adjustable constants, and agrees well with two experiments although the turning angle reached 16° and the devices only had two or four blades. With typical geometries, the interference between blades makes the circulation profile quite different from that behind an elliptically-loaded wing, prompting some doubt over the relevance of such a vortex to those trailing real wings.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2006