Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-13T09:37:26.436Z Has data issue: false hasContentIssue false

On upstream influence in shock wave turbulent boundary layer interaction

Published online by Cambridge University Press:  04 July 2016

D. S. Dolling*
Affiliation:
Mechanical and Aerospace Engineering Department, Princeton University, New Jersey

Summary

In shock wave turbulent boundary layer interaction, upstream influence is defined as the distance from the inviscid shock wave to where the incoming boundary layer is first disturbed. The latter position is generally taken as being where the mean wall pressure first increases above the undisturbed value. Wall pressure fluctuation measurements in two Mach 3, high Reynolds number interactions have shown that unsteadiness of the separation shock wave structure results in the instantaneous upstream influence varying over a range of values. Upstream influence as defined above is actually the maximum of this range and, at this distance upstream of the shock wave, the probability of finding the flow disturbed is correspondingly low. The minimum value of the range is the distance from the inviscid shock wave to where the incoming flow is always disturbed. In all of the cases studied the latter station was found to be just upstream of the separation point.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1992 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable