Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T15:50:32.060Z Has data issue: false hasContentIssue false

Optimum design for buckling of arbitrary shaped ribs under uncertain loadings

Published online by Cambridge University Press:  03 February 2016

A. C. Conrado
Affiliation:
Instituto Tecnológico de Aeronáutica, São José dos Campos, Brazil
A. R. de Faria
Affiliation:
Instituto Tecnológico de Aeronáutica, São José dos Campos, Brazil
S. F. M. de Almeida
Affiliation:
Instituto Tecnológico de Aeronáutica, São José dos Campos, Brazil
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Typically, aircraft wing structural panels are designed against buckling for a very large number of possible loadings that may occur during the operation of the aircraft. If the optimisation procedure accounts only for a limited number of design loads, the structure may be vulnerable to a specific type of loading that may cause the structure to fail. A novel approach for the optimisation of ribs or plates of arbitrary shapes under uncertain loads is proposed. The geometry of the rib is defined by a single closed spline or several connected splines. The loading distribution is not considered to be uniform but it is allowed to vary within an admissible set, conferring uncertainty to the applied loads. The admissible load space comprises distributed normal and shear loadings that can be represented through a collection of piecewise linear functions defined along the plate boundary. A special procedure is applied to handle the constraint that the loading must be self equilibrating. A minimax strategy is used to deal with the loading variability such that the resulting optimal design is able to withstand an entire class of linear piecewise loadings along the rib boundary. The refinement of the loading representation may be completely independent of the refinement of finite element mesh. The validity of the proposed approach is assessed by applying it to an aeronautical wing rib.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2005