Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T19:53:10.906Z Has data issue: false hasContentIssue false

Optimum design of a PID controller for the adaptive torsion wing

Published online by Cambridge University Press:  27 January 2016

M. Bourchak
Affiliation:
Aeronautics and Astronautics, University of Southampton, Southampton, UKAeronautical Engineering Department, King Abdulaziz UniversityJeddah, Saudi Arabia
R. M. Ajaj*
Affiliation:
Aeronautics and Astronautics, University of Southampton, Southampton, UK
E. I. Saavedra Flores
Affiliation:
Departamento de Ingeniería en Obras Civiles, Universidad de Santiago de Chile, Santiago, Chile
M. Khalid
Affiliation:
Aeronautical Engineering Department, King Abdulaziz UniversityJeddah, Saudi Arabia
K. A. Juhany
Affiliation:
Aeronautical Engineering Department, King Abdulaziz UniversityJeddah, Saudi Arabia
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper presents the optimum design of a PID controller for the Adaptive Torsion Wing (ATW) using the genetic algorithm (GA) optimiser. The ATW is a thin-wall, two-spar wingbox whose torsional stiffness can be adjusted by translating the spar webs in the chordwise direction inward and towards each. The reduction in torsional stiffness allows external aerodynamic loads to deform the wing and maintain its shape. The ATW is integrated within the wing of a representative UAV to replace conventional ailerons and provide roll control. The ATW is modelled as a two-dimensional equivalent aerofoil using bending and torsion shape functions to express the equations of motion in terms of the twist angle and plunge displacement at the wingtip. The full equations of motion for the ATW equivalent aerofoil were derived using Lagrangian mechanics. The aerodynamic lift and moment acting on the aerofoil were modelled using Theodorsen’s unsteady aerodynamic theory. The equations of motion are then linearised around an equilibrium position and the GA is employed to design a PID controller for the linearised system to minimise the actuation power require. Finally, the sizing and selection of a suitable actuator is performed.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2015