Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T06:28:04.429Z Has data issue: false hasContentIssue false

Parametric damage tolerance design of metallic aeronautical stiffened panels

Published online by Cambridge University Press:  27 January 2016

G. Molinari*
Affiliation:
MaSTeR Lab – Material Structure Technology Research Laboratory, Faculty of Engineering, University of Bologna, Forli, Italy
I. Meneghin
Affiliation:
MaSTeR Lab – Material Structure Technology Research Laboratory, Faculty of Engineering, University of Bologna, Forli, Italy
M. Melega
Affiliation:
MaSTeR Lab – Material Structure Technology Research Laboratory, Faculty of Engineering, University of Bologna, Forli, Italy
E. Troiani
Affiliation:
MaSTeR Lab – Material Structure Technology Research Laboratory, Faculty of Engineering, University of Bologna, Forli, Italy
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

On the basis of well-known literature, an analytical tool named LEAF (linear elastic analysis of fracture) was developed by the authors to predict the damage tolerance (DT) proprieties of aeronautical stiffened panels. The tool is based on the linear elastic fracture mechanics and the displacement compatibility method. By means of LEAF, an extensive parametric analysis of stiffened panels, representative of typical aeronautical constructions, was performed to provide meaningful design guidelines. The effects of riveted, integral and adhesively bonded stringers on the fatigue crack propagation performances of stiffened panels were investigated, as well as the crack retarder contribution using metallic straps (named doublers) bonded in the middle of the stringers bays. The effect of both perfectly bonded and partially debonded doublers was investigated as well. Adhesively bonded stiffeners showed the best DT properties in comparison with riveted and integral ones. A great reduction of the skin crack growth propagation rate can be achieved with the adoption of additional doublers bonded between the stringers.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2012