Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T18:23:29.257Z Has data issue: false hasContentIssue false

Passive control of pre-entry shock in supersonic intakes

Published online by Cambridge University Press:  04 July 2016

S.C. Rolston
Affiliation:
Department of Aeronautical EngineeringThe Queen's University of Belfast
S. Raghunathan
Affiliation:
Department of Aeronautical EngineeringThe Queen's University of Belfast

Abstract

Passive boundary layer control experiments were conducted on a small supersonic sidewall intake at a Mach number of 1·46 to study the possibility of controlling and improving the intake performance by such a control. The passive control configurations tested included a suction slot in the intake duct located down stream of the shock system (1) connected by a breather passage to a narrow tangential injection slot upstream of the intake and (2) vented to a location where the pressure is free stream static pressure and well away from the inlet of the intake. The results of the experiments showed, that for a supersonic intake, passive control can control the pre-entry shock position, reduce the shock interaction losses and improve the overall pressure recovery.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1994 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable