Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T00:48:52.156Z Has data issue: false hasContentIssue false

The prediction of riblet behaviour with a low-Reynolds number k-ε model

Published online by Cambridge University Press:  04 July 2016

B.E. Launder
Affiliation:
Department of Mechanical Engineering, Thermodynamics and Fluids Division, UMIST
S-P. Li
Affiliation:
Department of Mechanical Engineering, Thermodynamics and Fluids Division, UMIST

Abstract

The paper reports the first computational explorations of the flow in the vicinity of riblets with a two-equation turbulence model. For simplicity fully developed flow in a plane channel is considered though the results should be applicable to boundary-layer flow, as the riblets are confined within the (virtually) constantstress near-wall sublayer. The study of idealised L-shaped (or blade) riblets showed larger levels of drag reduction (up to 22%) than have hitherto been reported. When the usual triangular-profile riblets were considered, however, the maximum drag reduction was reduced to about 10%, in line with experiment.

Although the maximum drag reduction is well predicted, there are serious differences from experiment for the values of h+ at which the optimum performance is achieved. Moreover, the computations suggest that at low Re for h+ < 10, drag increases result. These anomalies highlight two distinct and counteracting weaknesses in the model of turbulence: there is an insufficient sensitivity of the equation to three-dimensional straining in the jow-Reynolds-number region while use of an isotropic viscosity model enforces zero secondary circulation in the vicinity of the riblets.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1992 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable