Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T16:02:49.035Z Has data issue: false hasContentIssue false

The Problem of High Temperature Alloys for Gas Turbines

Published online by Cambridge University Press:  03 February 2016

Abstract

It is now a matter of history that the development of an efficient gas turbine for use in aircraft engines had to await the availability of materials with the properties which would give an adequate life under the conditions which have to be imposed for efficient and economic service. These conditions are, of their type, more severe than any so far imposed on materials in other mechanical equipment. For efficient operation the gases employed in the turbine must be at a high temperature and the flow of gas passing through must be large. In aircraft engines also, the turbine must operate at high speed, with the resulting accompaniment of high stresses. It was to the metallurgist that the engineer naturally turned first for materials to meet these conditions of high temperatures and high stresses and, although some attention has been given to non-metallic substances, the problem still remains essentially a metallurgical one.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1948

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable