Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-19T01:56:28.923Z Has data issue: false hasContentIssue false

Relationships between turbulent intensities in turbulent pipe and channel flows

Published online by Cambridge University Press:  04 July 2016

Kaisar Mosa
Affiliation:
Department of Mechanical Engineering, University of Technology, Baghdad
Mati Alshamani
Affiliation:
Department of Mechanical Engineering, University of Technology, Baghdad

Extract

Axial, normal (radial) and tangential turbulence intensity measurements have been carried out in the past in pipe and two-dimensional channel flows, e.g. Refs. 1-9. A similarity in the distribution of these turbulence intensities is observed. They are all minimum at the centreline, increasing steadily as the wall is approached, until they reach some maximum values close to the wall, then they start to decrease as the wall is approached further. Furthermore, the three components of turbulence intensity have been observed to vary in a similar way with the Reynolds number.

On the other hand, the Prandtl mixing length theory assumes that the turbulent fluctuations are proportional to the product of a local mixing length and a velocity gradient. This implies that the turbulence fluctuations are directly proportional to each other. It is, therefore, found worthwhile examining the possibility of a relationship between the turbulence intensities. Smooth pipe and channel flows are chosen for this purpose.

Information

Type
Technical Note
Copyright
Copyright © Royal Aeronautical Society 1979 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable