Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T08:57:05.119Z Has data issue: false hasContentIssue false

Some Boundary Layer Measurements on a Slender Wing at Supersonic Speeds

Published online by Cambridge University Press:  04 July 2016

R. T. Griffiths*
Affiliation:
Formerly Royal Aircraft Establishment, Bedford, now Lecturer in Mechanical Engineering, University College, Swansea

Summary

Boundary layer measurements have been made at four positions on a slender gothic wing of aspect ratio 0·75. Test's were made over a range of incidence at M=1·42 and 1·82. With transition fixed by roughness near the leading edge the boundary layer thickness varied little with small positive or negative incidence but was reduced at larger incidences, this being most marked at positive incidence for positions nearest the leading edge due to the influence of the wing vortex. With the exception of positions in the vicinity of the vortex, a good estimate of the boundary layer thickness was given by the theory for incompressible flow over a flat plate and an excellent estimate of the variation of local static pressure and Mach number with incidence was given by not-so-slender wing theory.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1963

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable