Hostname: page-component-74656f9884-rdgjk Total loading time: 0 Render date: 2026-11-08T07:05:16.308Z Has data issue: false hasContentIssue false

Spiral vortex flow over a swept-back wing

Published online by Cambridge University Press:  04 July 2016

D. I. A. Poll*
Affiliation:
Aerodynamics Division, College of Aeronautics, Cranfield Institute of Technology

Summary

An experimental investigation has been performed to study the formation and development of spiral vortex flow over a swept-back wing. An aerofoil section with three alternative leading edge shapes was tested at sweep angles ranging from 0° to 56° for unit Reynolds numbers of 1 × 106/m and 2 × 106/m. The principal diagnostic tool was the surface oil-flow visualisation technique supplemented by pressure distribution measurements in certain cases. No spiral vortex flow was observed for sweep angles of 0° and 15° but at higher sweep angles the oil-flows indicated that there were three different mechanisms for the formation of spiral vortices. The angle of incidence at the onset of vortex flow, and the mechanism responsible for its formation, were found to depend upon the sweep angle, the leading edge shape and the Reynolds number. It was also noted that the larger the leading edge radius the greater the dependence upon Reynolds number. However, comparison with other work suggests that Reynolds number, incidence and sweep angle alone are insufficient to determine the type of spiral vortex flow occurring on a given wing.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 1986 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable