Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T17:29:13.763Z Has data issue: false hasContentIssue false

Structural health monitoring technology for a full-scale aircraft structure under changing temperature

Published online by Cambridge University Press:  27 January 2016

D. Gao*
Affiliation:
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, China
Y. Wang*
Affiliation:
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, China
Z. Wu*
Affiliation:
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, China
G. Rahim*
Affiliation:
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, China
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper presents optimal operating modes for the factors to maximise the detection capability of a given SHM technology in service environment. Firstly, an orthogonal experiment was performed to determine the importance ranking of the influence factors. Through the test, it is found that operating temperatures for SHM hardware and excitation frequencies for PZT actuator were the most critical factors. Then, numerical model of Lamb waves generated and received by PZT sensors were presented to predict the distribution of response signal amplitudes under changing temperature. Verification tests were carried out on a glass fibre reinforced composite plate at different temperatures. The comparison between the analytical prediction and test results was presented and temperature-dependent optimal frequencies for PZT actuators were obtained. Finally, SHM experiments of full-scale horizontal composite structures are presented. The detection capability of the SHM technology applications of aircrafts in real world is verified by the experimental results.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2014