Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T11:46:37.931Z Has data issue: false hasContentIssue false

Surface thermometry by laser-induced fluorescence of Dy3+:YAG

Published online by Cambridge University Press:  04 July 2016

K. Kontis
Affiliation:
UMIST, Manchester, UK
Y. Syogenji
Affiliation:
Nagoya University, Nagoya, Japan
N. Yoshikawa
Affiliation:
Nagoya University, Nagoya, Japan

Abstract

A novel, non-intrusive, high spatial and temporal resolution thermal imaging system, based on the fluorescence properties of a dysprosium doped yttrium-aluminum-garnet (Dy3+:YAG) thermographic phosphor, has been developed. In this system, the phosphor coating on the test surface is excited by a pulsed Nd:YAG laser. The resulting fluorescent emission of the temperature sensitive 456nm transition and that of the temperature independent 496nm transition, are acquired using a pair of image-intensified charged coupled device cameras. The ratio of the acquired emissions is then correlated to temperature. The Dy:YAG phosphor displays temperature sensitivity in the range of 295–l,350K (with possibility up to 1,800K). Temperature measurements obtained from the surface of a disk heated by an impinging jet, demonstrate the feasibility of this technique for general heat transfer studies involving significant unsteadiness and transient phenomena.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2002 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable