Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-12T07:45:45.228Z Has data issue: false hasContentIssue false

Velocity scales for constrained flows

Published online by Cambridge University Press:  04 July 2016

A. S. Ramamurthy
Affiliation:
Civil Engineering Department, Sir George Williams University, Montreal
P. M. Lee
Affiliation:
Civil Engineering Department, Sir George Williams University, Montreal
G. P. Ng
Affiliation:
Civil Engineering Department, Sir George Williams University, Montreal

Extract

Two-dimensional flow past a bluff body can be constrained under two important circumstances. For single models, the side walls of a testing facility can impose a constraint on the flow past the model. On the other hand, for single row configurations the adjacent members impose a constraint on the flow past an intermediate member of the row. Both these effects are a consequence of boundary interference.

Ealier investigations related to the interference effects of side walls on the vortex shedding frequency and drag coefficient of single bluff bodies were limited to weakly constrained flows. Recently, side wall interference effects have been reported for severely constrained two-dimensional flows past normal plates, inclined plates, triangular prisms and circular cylinders Constraint or blockage for two-dimensional flow is defined as the ratio of the model width to the test section width. While defining blockage for single rows of bodies, the width of the test section has to be replaced by the spacing between adjacent rows of bodies.

Information

Type
Technical notes
Copyright
Copyright © Royal Aeronautical Society 1975 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable