Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T08:08:08.715Z Has data issue: false hasContentIssue false

Wind tunnel testing of powered lift, all-wing STOL model

Published online by Cambridge University Press:  03 February 2016

S. W. Collins
Affiliation:
scott.collins@ngc.com, Northrop Grumman Corporation, El Segundo California, USA
B. W. Westra
Affiliation:
scott.collins@ngc.com, Northrop Grumman Corporation, El Segundo California, USA
J. C. Lin
Affiliation:
NASA Langley Research Center, Hampton, Virginia, USA
G. S. Jones
Affiliation:
NASA Langley Research Center, Hampton, Virginia, USA
C. H. Zeune
Affiliation:
Air Force Research Laboratory, Wright-Patterson AFB, Ohio, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Short take-off and landing (STOL) systems can offer significant capabilities to warfighters and, for civil operators thriving on maximising efficiencies they can improve airspace use while containing noise within airport environments. In order to provide data for next generation systems, a wind tunnel test of an all-wing cruise efficient, short take-off and landing (CE STOL) configuration was conducted in the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) 14ft by 22ft Subsonic Wind Tunnel. The test’s purpose was to mature the aerodynamic aspects of an integrated powered lift system within an advanced mobility configuration capable of CE STOL. The full-span model made use of steady flap blowing and a lifting centerbody to achieve high lift coefficients. The test occurred during April through June of 2007 and included objectives for advancing the state-of-the-art of powered lift testing through gathering force and moment data, on-body pressure data, and off-body flow field measurements during automatically controlled blowing conditions. Data were obtained for variations in model configuration, angles of attack and sideslip, blowing coefficient, and height above ground. The database produced by this effort is being used to advance design techniques and computational tools for developing systems with integrated powered lift technologies.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society 2009