Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T18:48:12.500Z Has data issue: false hasContentIssue false

An Experimental Study of the Static and Dynamic Behaviour of a Tensioned Sheet with a Rectangular Opening

Published online by Cambridge University Press:  07 June 2016

P K Datta*
Affiliation:
Indian Institute of Technology, Kharagpur
Get access

Summary

The results of an experimental study of the buckling and vibration behaviour of tensioned sheets with a rectangular opening are presented. The buckling phenomenon involves the existence of a non-uniform pre-buckle stress state in the vicinity of the opening. The local buckling load has been estimated on the basis of the modified Southwell method. The effect of parameters like cut-out size, sheet width, sheet thickness and cut-out corner radius has been investigated. The data from the vibration experiments indicate that the load versus frequency behaviour is dependent on the size of the test specimen and the opening shape. It has been observed that, for certain combinations of plate and opening parameters, the load versus frequency plot has a minimum corresponding to the local buckling of the free edge of the hole. For other plate and opening parameters it shows only a kink corresponding to the local buckling of the free edge of the cut-out. The buckling load for the opening shapes obtained from both the static and dynamic experiments are compared, showing good agreement.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1976

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable