Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T04:48:24.402Z Has data issue: false hasContentIssue false

Interaction of a Shock Wave with a Turbulent Boundary Layer Disturbed by Injection

Published online by Cambridge University Press:  07 June 2016

L.C. Squire
Affiliation:
Cambridge University Engineering Department
M.J. Smith
Affiliation:
Cambridge University Engineering Department
Get access

Summary:

An experimental investigation has been made to study the interaction between an incident oblique shock wave and a turbulent boundary layer on a solid surface downstream of a porous surface with air injection through the porous surface. The results are clearly of direct interest to the design of cooled turbine blades. However, the boundary-layer profiles in the absence of the shock are similar to those in a boundary layer subjected to an adverse pressure gradient so that the results at the interaction also give some indication of the effects of an isentropic compression upstream of a shock/boundary-layer interaction. The experiments show the surprising result that the shock strength to produce incipient Separation is virtually independent of the shape of the boundary-layer profile upstream of the interaction, although the scale of the interaction increases with increase in the injection rate.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1980

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable