Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T17:28:21.744Z Has data issue: false hasContentIssue false

The Effect of Base Bleed on the Flow behind a Two-Dimensional Model with a Blunt Trailing Edge

Published online by Cambridge University Press:  07 June 2016

P. W. Bearman*
Affiliation:
Cambridge University Engineering Laboratory*
Get access

Summary

The effects of base bleed on the flow about a two-dimensional model with a blunt trailing edge were examined at Reynolds numbers, based on model base height, between 1·3×104 and 4·1×104. The ratio of boundary layer thickness at the trailing edge to half the model base height was approximately 0·4. Measurements were made of base pressure, vortex shedding frequency and the distance to vortex formation. With a sufficiently large bleed quantity the regular vortex street pattern disappeared and the base drag of the section was reduced to about a third of its value without bleed. The base pressure was found to vary linearly with the inverse of the vortex formation distance. Results of a previous splitter plate investigation were found to agree closely with those of the present experiments.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1967

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable