Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T04:48:46.992Z Has data issue: false hasContentIssue false

Experiments with an Electrical Analogue for the Extension and Flexure of Flat Plates

Published online by Cambridge University Press:  07 June 2016

P. J. Palmer
Affiliation:
Department of Civil Engineering, University of Birmingham
S. C. Redshaw
Affiliation:
Department of Civil Engineering, University of Birmingham
Get access

Summary

Details of the design, construction and use of an electrical resistance network for solving certain of the problems encountered in the flexure and extension of flat plates are given. Some typical experiments have been carried out with the aid of this network and the method of operation of the analogy is described. The results of these experiments are presented and they are compared with the corresponding theoretical values. The comparison is as good as could be expected in view of the limitations imposed by the very coarse mesh which was used; essentially the same results would have been obtained by the exercise of a relaxation computation, using the same size of net. No practical difficulties would be encountered in building a large network having a very fine mesh.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1955

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable