Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T12:47:34.814Z Has data issue: false hasContentIssue false

The Impingement of a Uniform, Axisymmetric, Supersonic Jet on a Perpendicular Flat Plate

Published online by Cambridge University Press:  07 June 2016

J. H. Gummer
Affiliation:
Snowy Mountains Hydroelectric Authority, Australia
B. L. Hunt
Affiliation:
University of Bristol
Get access

Summary

The impingement region produced by directing a uniform, axisymmetric, supersonic jet of air normally onto a large, flat plate has been investigated experimentally and theoretically for four jets in the Mach number range 1·64 to 2·77. A qualitative theoretical description of the flow in the neighbourhood of the sonic line is given. A single-strip version of the method of Polynomial Approximation and Integral Relations (PIR) is applied to the flow, using two alternative methods of determining the centre-line shock height. The PIR predictions are compared to experimental shock shapes and pressure distributions. It is found that a PIR method in which the sonic line is assumed to intersect the shock at the jet edge leads to very good agreement with experiment at the higher jet Mach numbers, but accuracy is much reduced at the lower Mach numbers, the shock height being in error by about 62 per cent at a jet Mach number of 1·64. A change in flow pattern at small nozzle-to-plate distances is reported.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1971

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable