Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T01:58:33.677Z Has data issue: false hasContentIssue false

Laminar Boundary Layers over Permeable Curved Surfaces

Published online by Cambridge University Press:  07 June 2016

B. R. Clayton
Affiliation:
Department of Mechanical Engineering, University College London
B. S. Massey
Affiliation:
Department of Mechanical Engineering, University College London
Get access

Summary

Steady, constant-density, two-dimensional flow in a laminar boundary layer is considered over a permeable curved surface, for conditions such that the equation of motion has similar solutions. Account is also taken of the displacement of the main stream by the boundary layer.

Integration of the equation of motion on a digital computer yields results indicating that, for given values of curvature and longitudinal pressure gradient, suction reduces the boundary-layer thickness and increases skin friction. Blowing has the reverse effects. The amount of suction or blowing required to produce neutral stability is independent of curvature and so may be deduced from data for flat surfaces.

For a given curvature, blowing reduces, whereas suction increases, the magnitude of the adverse pressure gradient which the boundary layer can withstand before separation occurs. For a surface through which there is blowing or only a small amount of suction, convex curvature also reduces the magnitude of the adverse pressure gradient producing separation; but for larger amounts of suction the effect of surface curvature on separation is reversed.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1969

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable