Hostname: page-component-74656f9884-npj9w Total loading time: 0 Render date: 2026-11-09T03:46:44.034Z Has data issue: false hasContentIssue false

A Normal Flat Plate Close to a Large Plane Surface

Published online by Cambridge University Press:  07 June 2016

K.W. Everitt*
Affiliation:
Department of Engineering Science, University of Warwick
Get access

Summary

The flow around a normal flat plate close to a large plane surface has been investigated for a range of boundary-layer thickness on the plane surface of 0.72 to 2.53 times the plate height, h. As the gap between the plate and the plane surface is reduced below about 0.55h vortex shedding from the plate is inhibited by the presence of the plane surface. Boundary layer thickness has little effect on the gap at which this occurs, but does affect the strength and frequency of vortex shedding at greater gaps. As the gap between the plate lower edge and the plane surface is decreased towards the critical value of 0.55h, both vortex strength and Strouhal number are more significantly affected when the approaching boundary layer is thin. It is not clear whether this is a result of shear or increased turbulent intensity.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable