Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T14:09:35.108Z Has data issue: false hasContentIssue false

Numerical Results for the Initial Buckling of Some Stiffened Panels in Compression

Published online by Cambridge University Press:  07 June 2016

F W Williams
Affiliation:
Department of Civil Engineering, University of Birmingham
W H Wittrick
Affiliation:
Department of Civil Engineering, University of Birmingham
Get access

Summary

In previous papers the basis of a matrix approach to the initial buckling or vibration of prismatic structures consisting of a series of thin flat rectangular plates rigidly connected together along their longitudinal edges has been developed. The present paper provides numerical results for the buckling, under uniform longitudinal compression, of a series of panels with unflanged or flanged integral stiffeners, or with Z-section stiffeners; the results are compared with those obtained by other methods and with published results, including an appropriate Royal Aeronautical Society Structures Data Sheet. It was found that considerable inaccuracies can arise from the usual methods of analysis and the authors believe that these justify the use of computer programmes, such as the ones used to obtain the results of this paper, at least at the final design stage.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1972

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable