Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T19:08:19.126Z Has data issue: false hasContentIssue false

Two-Dimensional Boat-Tailed Bases in Supersonic Flow

Published online by Cambridge University Press:  07 June 2016

P R Viswanath
Affiliation:
Indian Institute of Science, Bangalore
R Narasimha
Affiliation:
Indian Institute of Science, Bangalore
Get access

Summary

Boat-tailing of aft bodies may affect the base pressure through two mechanisms: firstly by changing the angle between the approaching flow at separation and the reattachment surface, and secondly by distorting the boundary layer through the favourable pressure gradient (which can be particularly severe in the presence of a sharp corner on the body). The first effect is isolated here by tests on inclined backward-facing steps with a fully developed turbulent boundary layer at separation, at free-stream Mach numbers of 1.75 and 2.4. It is found that the base pressure increases significantly with boat-tail angle; the data have been correlated taking explicit account of the boundary layer effect, modifying and extending the approach adopted by Nash. Charts are provided for quick estimation of base pressure in engineering calculations. Some of the earlier data on boat-tailed bases, on re-examination in the light of the present correlation, suggest that strongly distorted boundary layers at separation affect the base pressure appreciably. Several features of the measured reattachment pressure distributions, including their internal similarity, are also discussed.

Information

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1974

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable