Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T21:20:14.880Z Has data issue: false hasContentIssue false

Computer-aided design/engineering of bearing systems using the Dempster-Shafer theory

Published online by Cambridge University Press:  27 February 2009

A.C. Butler
Affiliation:
 Mechanical Engineering Department, Purdue University, W. Lafayette, IN 47907-1288, USA
F. Sadeghi
Affiliation:
 Mechanical Engineering Department, Purdue University, W. Lafayette, IN 47907-1288, USA
S.S. Rao
Affiliation:
 Mechanical Engineering Department, Purdue University, W. Lafayette, IN 47907-1288, USA
S.R. LeClair
Affiliation:
 U.S. Air Force Materials Directorate, WL/MLIM, Wright-Patterson AFB, OH 45433USA

Abstract

Research in computer-aided design/engineering (CAD/E) has focused on enhancing the capability of computer systems in a design environment, and this work has continued in this trend by illustrating the use of the Dempster-Shafer theory to expand the computer’s role in a CAD/E environment. An expert system was created using Dempster-Shafer methods that effectively modeled the professional judgment of a skilled tribologist in the selection of rolling element bearings. A qualitative and symbolic approach was used, but access to simple quantitative models was provided to the expert system shell. Although there has been significant discussion in the literature regarding modification/improvement of the Dempster-Shafer theory, Shafer’s theories were found adequate in all respects for replicating the expert’s judgment. However, an understanding of the basic theory is required for interpreting the results.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable