Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T16:55:20.259Z Has data issue: false hasContentIssue false

Analysis and optimisation of looped water distribution networks

Published online by Cambridge University Press:  17 February 2009

Brian Young
Affiliation:
Department of Civil Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea.
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A three stage procedure for the analysis and least-cost design of looped water distribution networks is considered in this paper. The first stage detects spanning trees and identifies the true global optimum for the system. The second stage determines hydraulically feasible pipe flows for the network by the numerical solution of a set of non-linear simultaneous equations and shows that these solutions are contained within closed convex polygonal regions in the solution space bounded by singularities resulting from zero flows in individual pipes. Ideal pipe diameters, consistent with the pipe flows and the constant velocity constraint adopted to prevent the system degenerating into a branched network, are selected and costed. It is found that the most favourable optimum is in the vicinity of a vertex in the solution space corresponding to the minimum spanning tree. In the third stage, commercial pipes are specified and the design finalised. Upper bound formulae for the number of spanning trees and hydraulically feasible solutions in a network have also been proposed. The treatment of large networks by a heuristic procedure is described which is shown to result in significant economies compared with designs obtained by non-linear programming.

Information

Type
Research Article
Copyright
Copyright © Australian Mathematical Society 2000