Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T04:33:53.772Z Has data issue: false hasContentIssue false

Contact problem of an elastic plug in an elastic region

Published online by Cambridge University Press:  17 February 2009

G. P. Steven
Affiliation:
Department of Aeronautical Engineering, The University of Sydney, Sydney, N.S.W., 2006, Australia.
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The contact problem investigated in this paper may be more fully described as a three dimensional elastic body with a circular hole through it; inside this tunnel is press fitted a solid elastic plug of finite length. Shear stresses are taken to be absent along the contact interface.

An influence coefficient technique is used to model the governing integral equation. For the elastic region the displacement influence coefficients due to bands of constant pressure are determined using a numerical quadrature on Fourier integrals. However, the plug, being of finite length, requires the superposition of two separate solutions to boundary value problems before the displacement influence coefficients can be determined.

Contact pressure distributions are presented for a sample of parameter variations and also for a case where hydrostatic pressure is present in the tunnel in the elastic region. Despite both components being elastic the imposition of a constant interference displacement along the interface still gives rise to the characteristic singularity in contact pressure at the edges of contact due to the strain discontinuity at these points.

Information

Type
Research Article
Copyright
Copyright © Australian Mathematical Society 1975