Hostname: page-component-74656f9884-g96k6 Total loading time: 0 Render date: 2026-11-10T11:39:34.392Z Has data issue: false hasContentIssue false
  • English
  • Français

Improved model of water cresting

Published online by Cambridge University Press:  17 February 2009

J. F. McCarthy
J. F. McCarthy
Affiliation:
BHP Research — Melbourne Laboratories, P.O. Box 264, Clayton, Vic. 3168, Australia.
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

An improved model of water cresting towards horizontal wells is presented, using a hodograph solution to the lateral edge drive model with a constant potential boundary at a finite outer radius. In this model, the water crest tends to a horizontal asymptote far from the well, correcting previous approaches which led to the unphysical result of a crest which never levels off but, rather, tends to a parabolic curve. The hodograph solution yields the shape of the free water-oil interface. It also yields integral representations for the lengths of boundary segments, and these have enabled the derivation of an explicit expression for the critical rate in terms of the outer radius. The critical rates calculated using the improved model do not differ significantly from those calculated using previous approaches. The main advantage of the model, therefore, is not a correction to the quantitative predictions of the critical rate, but the removal of physical inconsistencies in the underlying theory.

Information

Type
Research Article
Information
The ANZIAM Journal , Volume 35 , Issue 2 , October 1993 , pp. 207 - 222
Copyright
Copyright © Australian Mathematical Society 1993

References

[1]Bear, J., Dynamics of fluids in porous media (American Elsevier, New York, 1972).Google Scholar
[2]Bear, J. and Dagan, G., “Some exact solutions of interface problems by means of the hodograph method”, J. Geophys. Res. 69 (1964) 1563–1572.Google Scholar
[3]Chaperon, I., “Theoretical study of coning towards horizontal and vertical wells in anisotropic formations: subcritical and critical rates”, SPE (Society of Petroleum Engineers), Paper No. 15377 (October 5 1986).Google Scholar
[4]Dikken, B. J., “Pressure drop in horizontal wells and its effect on their production performance”, SPE (Society of Petroleum Engineers), Paper No. 19824 (October 8 1989).Google Scholar
[5]Dupuit, J., Etudes théoriques et pratiques sur le mouvement des eaux, 2nd ed. (Dumont, Paris, 1863).Google Scholar
[6]Giger, F. M., “Analytic 2-D models of water cresting before breakthrough for horizontal wells”, SPE Res. Eng. (November 1989) 409–416.CrossRefGoogle Scholar
[7]Houpeurt, A., Eléments de mécanique des fluides dans les milieux poreux (Editions Technip, Paris, 1975).Google Scholar
[8]McCarthy, J., “Gas and water cresting towards horizontal wells”, J. Aust. Math. Soc. Ser. B 35 (1993) 174–198.Google Scholar
[9]Muskat, M. and Wyckoff, R. B., “An approximate theory of water coning in oil production”, Trans. AIME 114 (1935) 144–163.Google Scholar