Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T13:43:16.193Z Has data issue: false hasContentIssue false

A simple and efficient method for manufacturing porous bioceramics

Published online by Cambridge University Press:  09 July 2018

Chuisheng Zeng
Affiliation:
College of Bio-Infomation, Chongqing University of Post & Telecommunication, Chongqing 400065, China
Xiaoming Chen
Affiliation:
Biomedical Materials and Engineering Center, Wuhan University of Technology, Wuhan 430070, China
Yuhua Yan
Affiliation:
Biomedical Materials and Engineering Center, Wuhan University of Technology, Wuhan 430070, China
Yanjun Zeng*
Affiliation:
Biomechanics & Medical Information Institute, Beijing University of Technology, Beijing 100022, China
Xiaoying Tang
Affiliation:
School of Life Science and Technology, Beijing Institute of Technology, Beijing 100081, China
Yilong Liang
Affiliation:
College of Bio-Infomation, Chongqing University of Post & Telecommunication, Chongqing 400065, China
*

Abstract

The purpose of this study was to develop a simple and efficient method for manufacturing porous bioceramics, in which small organic foam spheres were taken as the poremaking reagent and green bodies were made by hot die-casting in moulds. The raw materials (small organic foam spheres, paraffin, oleic acid and β-TCP powder) were mixed into a slurry at 30–120ºC and moulded into green bodies using a hot die-casting machine at 30–90ºC; the green bodies were then sintered and the porous bioceramics obtained. The main characteristics (structure and size of pores, water permeability, apparent porosity and shrinkage) were tested. The results indicated that the apparent porosity was high and directly proportional to the mass ratio between the small organic foam spheres and the β-TCP powder. The pores connected with each other in three dimensions; the size, distribution of the shapes and structures of the pores were clearly related to the dimensions of the small organic foam spheres. The water permeability was proportional to the hot die-casting pressures and the shapes of the samples could easily be controlled by selecting different moulds. This study indicated that the method can be used to manufacture porous bioceramics with controlled pore structures and different shapes effectively and easily by adding different amounts and sizes of small organic foam spheres, mixing the raw materials evenly, and by selection of the hot die-casting pressure and by the use of different moulds.

Information

Type
Research Papers
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable