Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T12:44:13.910Z Has data issue: false hasContentIssue false

Characterization of El-Tih kaolin quality using mineralogical, geochemical and geostatistical analyses

Published online by Cambridge University Press:  09 July 2018

A. A. Masoud*
Affiliation:
Geology Department, Faculty of Science, Tanta University, Tanta 31527, Egypt
G. Christidis
Affiliation:
Department of Mineral Resources Engineering, Technical University of Crete, Chania 73100, Greece
K. Koike
Affiliation:
Graduate School of Engineering, Kyoto University, Kyoto 615-8540, Japan

Abstract

Detailed multi-scale characterization of the kaolin quality and the controlling depositional environment is crucial for optimal quality upgrading and for prioritizing potential exploitation areas. In the present work, the quality of El-Tih kaolin, Egypt, was investigated using the chemical/mineralogical characteristics as well as the field observations of the clay. Chemical analysis of major oxides was carried out using energy dispersive X-ray fluorescence (EDS-XRF) spectrometry. Mineralogical analyses were carried out using X-ray diffraction (XRD) and scanning electron microscopy coupled with wavelength-dispersive X-ray spectroscopy (SEM-WDS). Spatial heterogeneity of the quality was evaluated applying kriging geostatistical techniques and potential zones were identified.

Results clarified an upward gradual deterioration of the quality via a decrease in the Al2O3 content and thickness of the clay layers, and an increase in the TiO2 content. According to the kriging maps, areas of high potentiality indices (PI) characterized by high Al2O3 and low SiO2 content and maximum thickness of the kaolin are located to the west and east, and decrease toward the central part of the study area. The high PI zones are dominated by pseudo-hexagonal platy kaolinite, often forming accordion- and book-like aggregates with subordinate quartz and traces of Fe and Ti oxides, yielding minimal TiO2 and Fe2O3 contents. These zones of high PI are considered optimal for exploitation. Kaolinite was formed as a result of intensive weathering of rhyolite/granite and basalt in the source area, and subsequent erosion, transportation and deposition of the weathering mantles in a flood environment with marked depositional energy variations. Results allowed comparison with worldwide kaolin occurrences, and suggested the suitability of the studied kaolins for use in paper coating and filling and in higher-grade ceramics, after removal of free Fe- and Ti-oxide impurities.

Information

Type
Research Article
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable