Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T17:19:40.462Z Has data issue: false hasContentIssue false

Composition and Properties of Synthetic Hydrotalcites

Published online by Cambridge University Press:  28 February 2024

C. Misra
Affiliation:
Alcoa Laboratories, Alcoa Center, Pennsylvania 15069
A. J. Perrotta
Affiliation:
Alcoa Laboratories, Alcoa Center, Pennsylvania 15069
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Hydrotalcites of high aluminum content have been synthesized from aluminate liquors of varying composition and activated magnesia obtained by calcination of hydroxide or hydroxycarbonate precursors. Lattice parameter measurements and chemical analyses of 21 synthetic hydrotalcites show that the aluminum substitution $$\left( {\rm{X = \frac{{Al}}{{Al + Mg}}}} \right)$$ for most of the products is about 0.35, which is at the maximum experimentally-observed limit of solid solubility. Pillared hydrotalcites were also prepared by molybdate, Chromate, and silicate anion replacement. A maximum distance of 10.4 Å between the brucite-like layers was observed for the Mo7O246− intercalated material.

Information

Type
Research Article
Copyright
Copyright © 1992, The Clay Minerals Society