Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T17:14:07.326Z Has data issue: false hasContentIssue false

Effect of Heating on Microcrystalline Synthetic Goethite

Published online by Cambridge University Press:  02 April 2024

Christian J. W. Koch
Affiliation:
Chemistry Department, Royal Veterinary and Agricultural University, DK-1871 Copenhagen V, Denmark
Morten Bo Madsen
Affiliation:
Laboratory of Applied Physics II, Technical University of Denmark, DK-2800 Lyngby, Denmark
Steen Mørup
Affiliation:
Laboratory of Applied Physics II, Technical University of Denmark, DK-2800 Lyngby, Denmark
Gunnar Christiansen
Affiliation:
Laboratory of Applied Physics III, Technical University of Denmark, DK-2800 Lyngby, Denmark
Leif Gerward
Affiliation:
Laboratory of Applied Physics III, Technical University of Denmark, DK-2800 Lyngby, Denmark
Jørgen Villadsen
Affiliation:
Haldor Topsøe Research Laboratories, DK-2800 Lyngby, Denmark
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The effect of heating synthetic microcrystalline goethite at 60°, 80°, and 105°C was studied by X-ray powder diffraction, electron microscopy, weight-loss measurements, and Mössbauer spectroscopy. Heating led to no detectable changes in the unit-cell parameters or crystallite size (210, 150, and 170 Å in the [020], [110], and [120] directions, respectively), however, some of the X-ray diffraction lines were broadened due to an increase in microstrain in these crystallographic directions. The superferromagnetic transition temperature increased from 43° to 46°, 53°, and 54°C after heating to 60°, 80°, and 105°C, respectively, showing that the desorption of water from the surfaces led to an enhanced magnetic coupling among the crystallites.

Information

Type
Research Article
Copyright
Copyright © 1986, The Clay Minerals Society