Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T16:56:44.498Z Has data issue: false hasContentIssue false

The Fabric of Mechanically Compacted Kaolin

Published online by Cambridge University Press:  01 July 2024

Richard L. Sloane
Affiliation:
Department of Civil Engineering, University of Arizona, Tucson
T. R. Kell
Affiliation:
Foundation and Materials Branch, U.S. Army Corps of Engineers, Southwest Division, Dallas, Texas
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

An electron microscope study was made to determine the effect of mechanical compaction method on the fabric produced in a compacted commercial kaolin. Direct platinum-shadowed carbon replicas were made from horizontal and vertical fracture surfaces within the middle third of cylindrical specimens compacted by static load, impact, and kneading compaction at optimum moisture content and at 3% above and below optimum. Replicas were studied in the electron microscope to arrive at a qualitative evaluation of fabric. No oriented fabric or edge-to-face random fabric of individual particles, as postulated by others, was found. Regardless of compaction method the fabric was found to consist of parallel and random arrangements of packets of kaolin flakes. Both impact and kneading compaction produced essentially the same fabric consisting of trajectories of parallel packets, probably the result of shearing deformation during compaction, within essentially randomly oriented zones of packets. Static load compaction produced a fabric in which some tendency of the packets to orient normal to the direction of loading was apparent. For all compaction methods some increase in parallel packet orientation was noted with increase in molding water content. The mode of parallel orientation differed between static load compacted specimens and those produced by either impact or kneading compaction. Results of the study indicate that some revision of concepts regarding particle orientation due to mechanical compaction should be made.

Information

Type
Research Article
Copyright
Copyright © Clay Minerals Society 1966