Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T22:19:10.363Z Has data issue: false hasContentIssue false
  • English
  • Français

Polyvinyl Alcohol-Clay Complexes Formed by Direct Synthesis

Published online by Cambridge University Press:  28 February 2024

Kathleen A. Carrado,
P. Thiyagarajan and
Delwin L. Elder
Kathleen A. Carrado
Affiliation:
Chemistry Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439
P. Thiyagarajan
Affiliation:
Intense Pulsed Neutron Source Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, Illinois 60439
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Synthetic hectorite clay minerals were hydrothermally crystallized with direct incorporation of a series of five water-soluble polyvinyl alcohols (PVA) of molecular weights from 9000-146,000. The molecular weight of PVA had little effect on the success of hydrothermal hectorite synthesis, d-spacing or the amount of polymer incorporated. The basal spacings range from 19.5 Å to 20.8 Å and the amount of polymer incorporated ranges from 20 wt.% to 23 wt.%. Incorporation of PVA within the clay inter-layers, along with Li(I) ions to compensate the lattice charge, is indicated. Thermal gravimetric analysis and small angle neutron scattering were used to further examine the polymer-clay systems. Small PVA-clay crystallites that are coated with excess PVA are indicated. Removal of the polymer does not alter the extended synthetic clay network, and the nitrogen BET surface area increases from <5 m2/g to >200 m2/g.

Keywords

ClaysDirect SynthesisHectoriteHydrothermal CrystallizationPolymer ClaysPolyvinyl AlcoholPVA

Information

Type
Research Article
Information
Clays and Clay Minerals , Volume 44 , Issue 4 , August 1996, pp. 506 - 514
Copyright
Copyright © 1996, The Clay Minerals Society

Footnotes

‡

The submitted manuscript has been authored by a contractor of the U.S. Government under contract No. W-31-109-ENG-38. Accordingly, the U.S. Government retains a nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so for U.S. Government purposes.

References

Aranda, P. and Ruiz-Hitzky, E.. 1992. Poly(ethylene oxide)-silicate intercalation compounds. Chem Mater 4: 1395–1403.CrossRefGoogle Scholar
Bandosz, T.J., Jagiello, J., Andersen, B. and Schwarz, J.A.. 1992a. Inverse gas chromatography study of modified smectite surface. Clays & Clay Miner 40: 306–310.CrossRefGoogle Scholar
Bandosz, T.J., Jagiello, J., Amankwah, K.A.G. and Schwarz, J.A.. 1992b. Chemical and structural properties of clay minerals modified by inorganic and organic material. Clay Miner 27: 435–444.CrossRefGoogle Scholar
Bandosz, T.J., Putyera, K., Jagiello, J. and Schwarz, J.A.. 1993. Applications of inverse gas chromatography to the study of the surface properties of modified layered materials. Micropor Mater 1: 73–79.CrossRefGoogle Scholar
Barrer, R.M.. 1978. Zeolites and clay minerals as sorbents and molecular sieves. New York: Academic Press. p 430.Google Scholar
Carrado, K.A., Thiyagarajan, P., Winans, R.E. and Botto, R.E.. 1991. Hydrothermal crystallization of porphyrin-containing layer silicates. Inorg Chem 30: 794–799.CrossRefGoogle Scholar
Carrado, K.A.. 1992. Preparation of hectorite clays utilizing organic and organometallic complexes during hydrothermal crystallization. Ind Eng Chem Res 31: 1654–1659.CrossRefGoogle Scholar
Carrado, K.A., Forman, J.E., Botto, R.E. and Winans, R.E.. 1993. Incorporation of phthalocyanines by cationic and anionic clays via ion exchange and direct synthesis. Chem Mater 5: 472–478.CrossRefGoogle Scholar
Carrado, K.A., Winans, R.E. and Botto, R.E.. 1994. Organic or organometallic template mediated clay synthesis. U.S. Patent 5,308,808.Google Scholar
Carrado, K.A., Thiyagarajan, P. and Elder, D.L.. 1995. Synthetic polymer-layer silicate clay composites. Prepr Pap—Am Chem Soc, Div of Petrol Chem 40: 310–313.Google Scholar
Carrado, K.A., Thiyagarajan, P. and Elder, D.E.. 1997. “Synthesis of microporous materials: Zeolites, clays, and nanostructures.” In: Occelli, M.L., Kessler, H., editors. Porous networks derived from synthetic polymer-clay complexes. New York: Marcel-Dekker. p 551–565.Google Scholar
Chang, S.-H., Ryan, M.E., Gupta, R.K. and Swiatkiewicz, B.. 1991. The adsorption of water-soluble polymers on mica, talc, limestone, and various clay minerals. Coll Surf 59: 59–70.CrossRefGoogle Scholar
Ege, D., Ghosh, P.K., White, J.R., Equey, J.-F. and Bard, A.J.. 1985. Clay modified electrodes. 3. Electrochemical and electron spin resonance studies of montmorillonite layers. J Am Chem Soc 107: 5644–5652.CrossRefGoogle Scholar
Greenland, D.J.. 1963. Adsorption of polyvinyl alcohols by montmorillonite. J Coll Sci 18: 647–664.CrossRefGoogle Scholar
Grim, R.E.. 1968. Clay mineralogy. New York: McGraw-Hill. p 86.Google Scholar
Kato, C., Kuroda, K. and Misawa, M.. 1979. Preparation of montmorillonite-nylon complexes and their thermal properties. Clays & Clay Miner 27: 129–136.CrossRefGoogle Scholar
Kato, C., Kuroda, K. and Takahara, H.. 1981. Preparation and electrical properties of quaternary ammonium montmorillonite-polystyrene complexes. Clays & Clay Miner 29: 294–298.CrossRefGoogle Scholar
Lagaly, G.. 1986. Developments in ionic polymers. In: Wilson, A.D., Prosser, H.T., editors. London: Applied Science Publ. p 77–140.CrossRefGoogle Scholar
Lan, T., Kaviratna, P.D. and Pinnavaia, T.J.. 1994. On the nature of polyimide-clay hybrid composites. Chem Mater 6: 573–575.CrossRefGoogle Scholar
Messersmith, P.B. and Giannelis, E.P.. 1993. Polymer-layered silicate nanocomposites: in situ intercalative polymerization of ∊-caprolactone in layered silicates. Chem Mater 5: 1064–1066.CrossRefGoogle Scholar
Newman, A.C.D.. 1987. Chemistry of clays and clay minerals. Essex, England: Longman Scientific & Technical (Mineralogical Society No. 6). p 257–259.Google Scholar
Ogawa, M., Inagaki, M., Kodama, N., Kuroda, K. and Kato, C.. 1993. Novel controlled luminescence of tris(2,2'-bipyridine)ruthenium(II) intercalated in a fluortetrasilicic mica with poly(vinylpyrrolidone). J Phys Chem 97: 3819–3823.CrossRefGoogle Scholar
Ogawa, M., Takahashi, M. and Kuroda, K.. 1994. Intercalation of p-nitroaniline into tetramethyl-ammonium saponite film under electric field and its optical second harmonic generation. Chem Mater 6: 715–717.CrossRefGoogle Scholar
Okada, A., Kawasumi, M., Usuki, A., Kojima, Y., Kurauchi, T. and Kamigaito, O.. 1990. Nylon 6-clay hybrid. Mater Res Soc Symp Proc 171: 45–50.CrossRefGoogle Scholar
Putyera, K., Bandosz, T.J., Jagiello, J. and Schwarz, J.A.. 1994. Sorption properties of carbon composite materials formed from layered clay minerals. Clays & Clay Miner 42: 1–6.CrossRefGoogle Scholar
Ruiz-Hitzky, E. and Aranda, P.. 1990. Polymer-salt intercalation complexes in layer silicates. Adv Mater 2: 545–547.CrossRefGoogle Scholar
Schamp, N. and Huylebroeck, J.. 1973. Adsorption of polymers on clays. J Polymer Sci 42: 553–562.Google Scholar
Schwieger, W., Werner, P. and Bergk, K.H.. 1991. A new synthetic layered silicate of type metal silicate hydrate. Coll Polym Sci 269: 1071–1073.CrossRefGoogle Scholar
Suzuki, K., Masakazu, H., Masuda, H. and Mori, T.. 1992. Adsorptive properties of swelling clays for poly(vinyl alcohol). Nendo Kagaku 32: 36–41.Google Scholar
Theng, B.K.G.. 1979. Formation and properties of clay-polymer complexes. Amsterdam: Elsevier. 362 p.Google Scholar
Theng, B.K.G.. 1982. Clay-polymer interactions: summary and perspectives. Clays & Clay Miner 30: 1–10.CrossRefGoogle Scholar
Wu, J. and Lerner, M.M.. 1993. Structural, thermal, and electrical characterization of layered nanocomposites derived form Na-montmorillonite and polyethers. Chem Mater 5: 835–838.CrossRefGoogle Scholar