Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T17:22:59.241Z Has data issue: false hasContentIssue false

Properties of Hydroxy-Al and -Cr Interlayers in Montmorillonite

Published online by Cambridge University Press:  28 February 2024

W. E. Dubbin
Affiliation:
Department of Soil Science, University of Manitoba, Winnipeg, Manitoba, Canada
Tee Boon Goh
Affiliation:
Department of Soil Science, University of Manitoba, Winnipeg, Manitoba, Canada
D. W. Oscarson
Affiliation:
AECL Research, Whiteshell Laboratories, Pinawa, Manitoba, Canada
F. C. Hawthorne
Affiliation:
Department of Geological Sciences, University of Manitoba, Winnipeg, Manitoba, Canada
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In environments contaminated with Cr, the interlayers of expandable layer silicates may serve as sinks for this potentially toxic element. As a means of determining the potential for smectites to serve as sinks for Cr, the precipitation products of Al and Cr in the interlayers of a montmorillonite were examined. Five montmorillonite (SWy-1) clay suspensions were treated with preweighed amounts of AlCl3 and CrCl3 to give five Al/(Al + Cr) molar ratios (1.0, 0.67, 0.5, 0.33, 0) with a total trivalent cation (M3+) concentration of 600 cmol(+)/kg clay. The clay-cation suspensions were titrated with 0.1 N NaOH to give a NaOH/M3+ molar ratio of 2.5. Analysis of the solid-phase reaction products showed that the cation exchange capacity and specific surface of all clays were reduced. Chromium reduced the exchangeability of the interlayers while Al increased the thermal stability. X-ray diffraction analysis revealed that all Al-containing interlayer materials formed similar gibbsitelike polymers. Data from infrared spectroscopy indicated that both Al and Cr were present within the same polymer. Differential thermal analysis and thermogravimetric tracings showed that the rapid collapse of the interlayer in the Cr end-member upon heating was due to a low-temperature loss of hydroxyls. It was not possible to identify all interlayer structures in the Cr end-member. Data from X-ray photoelectron spectroscopy showed all Cr to be Cr(III). Displacement of the interlayer material became more difficult as Cr content increased. The least exchangeable interlayers, therefore, may be found in environments containing the most Cr.

Information

Type
Research Article
Copyright
Copyright © 1994, Clay Minerals Society