Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T21:56:54.928Z Has data issue: false hasContentIssue false

Sodium Polyacrylate-Modified Bentonite and Its Dehydration Testing in Real Oil

Published online by Cambridge University Press:  01 January 2024

Fanyu Meng
Affiliation:
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Li Shi
Affiliation:
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Xuan Meng
Affiliation:
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Naiwang Liu*
Affiliation:
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Rights & Permissions [Opens in a new window]

Abstract

Removing trace water from oil is an important industrial process and is commonly accomplished using vacuum filtration. The drawbacks of this method, however, are: poor efficiency, large oil loss, and significant energy consumption. The objective of the current study was to develop a better system to solve these problems using a sodium polyacrylate (PAA-Na)-modified bentonite as the dehydrating agent and, for the first time, to apply it to transformer oil. PAA-Na was prepared by aqueous solution polymerization. A dehydration test was carried out to determine the optimum addition of PAA-Na, and the highest dehydration rate of 76.5% was obtained with the addition of 20 wt.% PAA-Na. The steady dehydration rate of the PAA-Na-modified bentonite was better than that of other adsorbents (calcium chloride, zeolite 5A, unmodified bentonite). The process of adsorbing saturated water vapor on PAA-Na modified bentonite was studied and interpreted from the aspects of adsorption isotherms and thermodynamic properties. The results showed that the adsorption isotherm data followed the Freundlich isotherm model and the thermodynamic parameters indicated that the process was endothermic. Fourier-transform infrared spectroscopy results revealed that PAA-Na was synthesized successfully and it had a huge proportion of hydrophilic groups. According to thermogravimetric analysis, the PAA-Na-modified bentonite was stable up to 200°C, giving a flexible region for pretreatment and regeneration. X-ray diffraction showed no change in the diffraction pattern before and after modification. Moreover, considering the results of scanning electron microscopy and surface-area analyses, one may safely say that PAA-Na was distributed homogeneously on the surface of the bentonite. In addition, PAA-Na-modified bentonite exhibited a high dehydration rate in xylene, naphtha, and diesel, indicating a broad range of applications.

Information

Type
Letter
Copyright
Copyright © The Author(s), under exclusive licence to The Clay Minerals Society 2022
Figure 0

Fig. 1a FTIR spectra of PAA-Na, FTIR spectra of bentonite and modified bentonite b before and c after water adsorption

Figure 1

Fig. 2PAA-Na powder a before and b after water adsorption; PAA-Na modified bentonite c before and d after water adsorption

Figure 2

Table 1Steady dehydration rate of various adsorbents

Figure 3

Fig. 3a Steady dehydration rate of feed oil by bentonite modified with various amounts of PAA-Na; b steady dehydration rate of feed oil at various water contents using bentonite modified with 20 wt.% PAA-Na

Figure 4

Fig. 4Water-adsorption isotherms of bentonite, PAA-Na, and bentonite modified with 20 wt.% PAA-Na

Figure 5

Table 2Parameters derived from application of the Freundlich adsorption isotherm

Figure 6

Table 3Parameters derived from application of the Langmuir adsorption isotherm

Figure 7

Table 4Thermodynamic parameters for bentonite, PAA-Na, and modified bentonite

Figure 8

Fig. 5TGA curves of a bentonite and b bentonite modified with 20 wt.% PAA-Na

Figure 9

Fig. 6Steady dehydration rate at various drying temperatures of bentonite modified with 20 wt.% PAA-Na

Figure 10

Fig. 7Steady dehydration rate of feed oil containing 28 ppm water at various space velocities

Figure 11

Table 5Transformer oil quality index before and after dehydration

Figure 12

Fig. 8XRD patterns of bentonite and bentonite modified with 10, 20, and 30 wt.% PAA-Na, a before and b after water adsorption for 12 h

Figure 13

Fig. 9SEM images of a-I, II bentonite and b-I, II bentonite modified with 20 wt.% PAA-Na

Figure 14

Fig. 10Bentonite and bentonite modified with 10, 20, and 30 wt.% of PAA-Na: a N2 adsorption-desorption isotherms and b pore-size distributions

Figure 15

Table 6Textural properties of the investigated samples

Figure 16

Fig. 11Bentonite and bentonite modified with 20 wt% of PAA-Na: A N2 adsorption-desorption isotherms (a) before and (b) after water adsorption; and B pore-size distributions a before and b after water adsorption

Figure 17

Table 7Textural properties of bentonite modified with 20 wt.% PAA-Na before (a) and after (b) water adsorption

Figure 18

Fig. 12Static adsorption capacities of various adsorbents and bentonite modified with 20 wt.% PAA-Na for various oils