Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T05:50:18.232Z Has data issue: false hasContentIssue false

Clay Technology in Ceramics

Published online by Cambridge University Press:  01 January 2024

Edward C. Henry*
Affiliation:
Division of Ceramics, School of Mineral Industries, Pennsylvania University, State College, Pennsylvania, USA

Abstract

Clays are used in the ceramics industries largely because of their contribution to the moulding and drying properties of the wares being produced; many clays, such as the flint clays, are used because of favorable behavior during firing or because they produce favorable properties in fired ware.

To assure the most effective use of a clay, the ceramic technologist must meet problems of purification, aging, bacterial action, and the improvement of the working properties of clays and bodies through additions of non-plastic materials or chemicals. He deals with flocculation and deflocculation, thixotropy, and related phenomena in casting slips. Control of drying behavior is important. Finally, the ceramist is concerned with the influence of the clay content of ceramic bodies on their behavior during firing.

Information

Type
Part VI—Clay Technology in Ceramics
Copyright
© Clay Minerals Society 1952

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable