Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-18T15:56:26.217Z Has data issue: false hasContentIssue false

Extension and Comparative Study of AUSM-Family Schemes for Compressible Multiphase Flow Simulations

Published online by Cambridge University Press:  03 June 2015

Keiichi Kitamura*
Affiliation:
NASA Glenn Research Center, Cleveland, OH 44135, USAResearch Fellow of Japan Society for the Promotion of Science (JSPS), JAXA’s Engineering Digital Innovation (JEDI) Center, 3-1-1 Yoshinodai, Chuo, Sagamihara, Japan; Previously at Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603 Japan; Currently at Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
Meng-Sing Liou*
Affiliation:
NASA Glenn Research Center, Cleveland, OH 44135, USA
Chih-Hao Chang*
Affiliation:
Theofanous & Co Inc. Santa Barbara, CA 93109, USA
*
Get access

Abstract

Several recently developed AUSM-family numerical flux functions (SLAU, SLAU2, AUSMM+-up2, and AUSMPW+) have been successfully extended to compute compressible multiphase flows, based on the stratified flow model concept, by following two previous works: one by M.-S. Liou, C.-H. Chang, L. Nguyen, and T.G. Theofanous [AIAA J. 46:2345-2356, 2008], in which AUSM+-up was used entirely, and the other by C.-H. Chang, and M.-S. Liou [J. Comput. Phys. 225:840-873, 2007], in which the exact Riemann solver was combined into AUSM+-up at the phase interface. Through an extensive survey by comparing flux functions, the following are found: (1) AUSM+-up with dissipation parameters of Kp and Ku equal to 0.5 or greater, AUSMPW+, SLAU2, AUSM+-up2, and SLAU can be used to solve benchmark problems, including a shock/water-droplet interaction; (2) SLAU shows oscillatory behaviors [though not as catastrophic as those of AUSM+ (a special case of AUSM+-up with Kp = Ku = 0)] due to insufficient dissipation arising from its ideal-gas-based dissipation term; and (3) when combined with the exact Riemann solver, AUSM+-up (Kp = Ku = 1), SLAU2, and AUSMPW+ are applicable to more challenging problems with high pressure ratios.

Information

Type
Research Article
Copyright
Copyright © Global Science Press Limited 2014

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable