Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T12:58:44.631Z Has data issue: false hasContentIssue false
  • English
  • Français

Cross-sections of unknotted ribbon disks and algebraic curves

Part of:Complex manifoldsLow-dimensional topology

Published online by Cambridge University Press:  11 February 2019

Kyle Hayden
Kyle Hayden*
Affiliation:
Department of Mathematics, Columbia University, New York, NY 10027, USA email hayden@math.columbia.edu
Rights & Permissions [Opens in a new window]

Abstract

We resolve parts (A) and (B) of Problem 1.100 from Kirby’s list [Problems in low-dimensional topology, in Geometric topology, AMS/IP Studies in Advanced Mathematics, vol. 2 (American Mathematical Society, Providence, RI, 1997), 35–473] by showing that many nontrivial links arise as cross-sections of unknotted holomorphic disks in the four-ball. The techniques can be used to produce unknotted ribbon surfaces with prescribed cross-sections, including unknotted Lagrangian disks with nontrivial cross-sections.

Keywords

ribbon surfacesalgebraic curvesLagrangian surfacesquasipositive links

MSC classification

Primary:57M25: Knots and links in $S^3$
Secondary:32Q55: Topological aspects of complex manifolds

Information

Type
Research Article
Information
Compositio Mathematica , Volume 155 , Issue 2 , February 2019, pp. 413 - 423
Copyright
© The Author 2019 

1 Introduction

A properly embedded surface $\unicode[STIX]{x1D6F4}$ in $B^{4}$ is said to be ribbon if the restriction of the radial distance function from $B^{4}$ to $\unicode[STIX]{x1D6F4}$ is a Morse function with no local maxima. As an important class of examples, holomorphic curves in $B^{4}\subset \mathbb{C}^{2}$ are naturally ribbon. This Morse-theoretic perspective has shed light on the topology of holomorphic curves $\unicode[STIX]{x1D6F4}\subset \mathbb{C}^{2}$ and the links that arise as transverse intersections $L_{r}=\unicode[STIX]{x1D6F4}\cap S_{r}^{3}$ , where $S_{r}^{3}$ is a sphere of radius $r>0$ ; see [Reference FiedlerFie89, Reference Boileau and OrevkovBO01, Reference BorodzikBor12, Reference HaydenHay17]. Rudolph [Reference RudolphRud83b] and Boileau and Orevkov [Reference Boileau and OrevkovBO01] showed that the links obtained as cross-sections of holomorphic curves are precisely the quasipositive links, a special class of braid closures. To fully exploit this characterization, it is necessary to understand the relationship between different cross-sections of the same holomorphic curve. This is the subject of Problem 1.100 in Kirby’s list.

Problem 1.100A/B [Reference Kirby and KazezKir97]. Let $\unicode[STIX]{x1D6F4}\subset \mathbb{C}^{2}$ be a smooth algebraic curve, with $L_{r}=\unicode[STIX]{x1D6F4}\cap S_{r}^{3}$ defined as above, and let $g$ denote the Seifert genus.

  1. (A) If $r\leqslant R$ , is $g(L_{r})\leqslant g(L_{R})$ ?

  2. (B) If $L_{R}$ is an unlink and $r\leqslant R$ , is $L_{r}$ an unlink?

For comparison, by Kronheimer and Mrowka’s proof of the local Thom conjecture [Reference Kronheimer and MrowkaKM94], the slice genus $g_{\ast }$ is known to satisfy $g_{\ast }(L_{r})\leqslant g_{\ast }(L_{R})$ for $r\leqslant R$ . In addition, since Seifert and slice genera are equal for strongly quasipositive links by [Reference RudolphRud93], the answer to part (A) of Problem 1.100 is ‘yes’ when $L_{r}$ is strongly quasipositive. Part (B) is a special case of part (A), and Gordon’s work [Reference GordonGor81] on ribbon concordance implies that the answer to (B) is ‘yes’ when $L_{r}$ is a knot, i.e. connected. In spite of this, we show the answers to (A) and (B) are both ‘no’.

Theorem 1. Every quasipositive slice knot arises as a link component in a cross-section of an unknotted holomorphic disk in $B^{4}\subset \mathbb{C}^{2}$ .

The holomorphic disks constructed in the proof of Theorem 1 are compact pieces of algebraic curves, hence provide the desired counterexamples to part (B) of Problem 1.100. The construction is inspired by a version of the Whitney trick that admits an appealing statement in terms of ribbon-immersed surfaces in $S^{3}$ , i.e. immersed surfaces with boundary whose singularities are of the type depicted in Figure 1(a): Every ribbon-immersed surface $F\subset S^{3}$ lies inside a larger one $F^{\prime }$ that is isotopic (through immersions that are injective along the boundary) to an embedded surface $F^{\prime \prime }$ . Moreover, the surface $F^{\prime }$ may be taken to have the same topological type as $F$ ; the construction is depicted in Figure 1. The corresponding four-dimensional construction can be used to embed an arbitrary ribbon surface inside one that is unknotted, i.e. isotopic to an embedded surface in $\unicode[STIX]{x2202}B^{4}$ .

Figure 1.

Embedding one ribbon-immersed surface in another, simpler one.

Any counterexamples to part (A) of Problem 1.100 constructed using Theorem 1 will have disconnected cross-sections $L_{r}$ . However, we can use an alternative construction to obtain a sharper result.

Theorem 2. For every integer $n\geqslant 0$ , there is a smooth algebraic curve $\unicode[STIX]{x1D6F4}_{n}$ and a pair of positive numbers $r<R$ such that $g(L_{r})=2n+1$ and $g(L_{R})=n+1$ , where $L_{r}=\unicode[STIX]{x1D6F4}_{n}\cap S_{r}^{3}$ and $L_{R}=\unicode[STIX]{x1D6F4}_{n}\cap S_{R}^{3}$ are knots.

For each $\unicode[STIX]{x1D6F4}_{n}$ , the smaller cross-section $L_{r}$ is a prime quasipositive 4-braid slice knot and $L_{R}$ is strongly quasipositive.

We also apply these techniques to study Lagrangian cobordisms between Legendrian links, as introduced in [Reference ChantraineCha10]. A Lagrangian filling of a Legendrian link $L$ in the standard contact $S^{3}$ is a properly embedded Lagrangian surface $\unicode[STIX]{x1D6F4}$ in the standard symplectic $B^{4}$ whose boundary is $L$ . We further require the Lagrangian $\unicode[STIX]{x1D6F4}\subset B^{4}$ to be orientable, exact, and collared; for the significance of these latter two conditions, see [Reference ChantraineCha12]. As discussed in [Reference Cornwell, Ng and SivekCNS16], it is currently unknown if there are nontrivial knots that arise as collarable cross-sections of a Lagrangian filling of the unknot. We show that the answer is ‘yes’ if the cross-section is allowed to be disconnected.

Theorem 3. There are infinitely many nontrivial links that arise as collared cross-sections of unknotted Lagrangian disks in the standard symplectic $B^{4}$ .

The remainder of the paper is organized as follows. In § 2, we explain the topological construction underlying our primary results. In § 3, we review the necessary background material on quasipositive braids and then prove Theorems 1 and 2. We close by constructing the Lagrangian disks needed to prove Theorem 3 in § 4.

Remark.

In a previous version of this work, it was claimed that Problem 1.100(B) has a positive answer. The argument relied on a statement about unknotted ribbon disks that was shown to be false by Jeffrey Meier and Alexander Zupan in a private correspondence (January 17, 2018). Their illumination of the error in the original argument ultimately led to Theorem 1 above. I wish to thank Meier and Zupan for their invaluable correspondence.

2 The topological construction

This brief section offers an informal account of the topological construction that inspires Theorem 1. Given a link $L\subset S^{3}$ , a band $b:I\times I\rightarrow S^{3}$ is an embedding of the unit square such that $L\cap b(I\times I)=b(I\times \unicode[STIX]{x2202}I)$ . A link $L^{\prime }$ is obtained from $L$ by band surgery along $b$ if $L^{\prime }=(L\setminus b(I\times \unicode[STIX]{x2202}I))\cup b(\unicode[STIX]{x2202}I\times I)$ . For example, Figure 2(a, b) presents the stevedore knot $6_{1}$ as the result of band surgery on an unlink. As illustrated in Figure 2(c), a description of a link $L$ as a result of band surgery on an unlink yields a natural ribbon-immersed spanning surface $F\subset S^{3}$ with $\unicode[STIX]{x2202}F=L$ : simply attach the bands to a collection of embedded disks bounded by the unlink.

Figure 2.

Band surgeries on unlinks and the corresponding ribbon surfaces.

In general, a ribbon-immersed surface $F\subset S^{3}$ will not be isotopic (through immersions that are injective along the boundary) to an embedded surface. However, we can always find another ribbon-immersed surface $F^{\prime }\subset S^{3}$ containing $F$ such that $F^{\prime }$ is isotopic to an embedded surface. The construction is summarized in Figure 1. For an example, see Figure 2(f), where the ribbon disk bounded by the stevedore knot from Figure 2(c) is embedded in a ribbon disk for the unknot that is isotopic to a standard embedded disk.

Under the correspondence between ribbon-immersed surfaces $F\subset S^{3}$ and ribbon surfaces $\unicode[STIX]{x1D6F4}\subset B^{4}$ (as in [Reference HassHas83]), the preceding observation implies that every ribbon disk embeds as a connected component in a sublevel set of an unknotted ribbon disk. Restricting to the perspective of cross-sections, we obtain a topological version of Theorem 1.

Observation 2.1. Every knot that bounds a ribbon disk in $B^{4}$ arises as a link component in a cross-section of an unknotted ribbon disk in $B^{4}$ .

3 Quasipositive band surgeries and algebraic curves

3.1 Bands and Bennequin surfaces

In [Reference Birman, Ko and LeeBKL98], Birman, Ko, and Lee define an alternative presentation of the $n$ -stranded braid group $B_{n}$ using generators of the form

$$\begin{eqnarray}\unicode[STIX]{x1D70E}_{i,j}=(\unicode[STIX]{x1D70E}_{i}\cdots \unicode[STIX]{x1D70E}_{j-2})\unicode[STIX]{x1D70E}_{j-1}(\unicode[STIX]{x1D70E}_{i}\cdots \unicode[STIX]{x1D70E}_{j-2})^{-1},\quad 1\leqslant i\leqslant j\leqslant n.\end{eqnarray}$$

Such generators had been used earlier by Rudolph [Reference RudolphRud83a], who termed $\unicode[STIX]{x1D70E}_{i,j}$ a (positive) embedded band. An expression of a braid in $B_{n}$ as a word $w$ in the generators $\unicode[STIX]{x1D70E}_{i,j}$ is called an embedded bandword. Given an embedded bandword $w$ for $\unicode[STIX]{x1D6FD}$ , there is a canonical Seifert surface $F_{w}$ , called the Bennequin surface, constructed from $n$ parallel disks by attaching a positively (respectively negatively) twisted embedded band between the $i$ th and $j$ th disks for each term $\unicode[STIX]{x1D70E}_{i,j}$ (respectively  $\unicode[STIX]{x1D70E}_{i,j}^{-1}$ ) in $w$ ; see Example 3.1 below. Note that the Euler characteristic of the resulting surface is $n-|w|$ , where $|w|$ denotes the length of the embedded bandword.

Figure 3.

Bennequin surfaces for the braids $\unicode[STIX]{x1D6FD}_{0}$ (left) and $\unicode[STIX]{x1D6FD}_{1}$ (right).

Example 3.1. The Bennequin surfaces in Figure 3 correspond to embedded bandwords $\unicode[STIX]{x1D6FD}_{0}=\unicode[STIX]{x1D70E}_{1,4}\unicode[STIX]{x1D70E}_{2}\unicode[STIX]{x1D70E}_{1,3}^{-1}\unicode[STIX]{x1D70E}_{2,4}\unicode[STIX]{x1D70E}_{1,3}$ and $\unicode[STIX]{x1D6FD}_{1}=\unicode[STIX]{x1D70E}_{1,4}\unicode[STIX]{x1D70E}_{2}\unicode[STIX]{x1D70E}_{1}\unicode[STIX]{x1D70E}_{1,3}^{-1}\unicode[STIX]{x1D70E}_{1}^{-1}\unicode[STIX]{x1D70E}_{2,4}\unicode[STIX]{x1D70E}_{1}\unicode[STIX]{x1D70E}_{1,3}\unicode[STIX]{x1D70E}_{1}^{-1}$ . These are minimal-genus Seifert surfaces for $\unicode[STIX]{x1D6FD}_{0}$ and $\unicode[STIX]{x1D6FD}_{1}$ . Indeed, we can confirm $g(\unicode[STIX]{x1D6FD}_{0})=1$ and $g(\unicode[STIX]{x1D6FD}_{1})=3$ using their Alexander polynomials (which have degree two and six, respectively) and the bound $g(K)\geqslant \deg (\unicode[STIX]{x1D6E5}_{K})/2$ , where $K$ is any knot and $\deg (\unicode[STIX]{x1D6E5}_{K})$ is defined as the breadth of $\unicode[STIX]{x1D6E5}_{K}$ .

A braid is called strongly quasipositive if it is a product of positive embedded bands [Reference RudolphRud90], cf. [Reference RudolphRud83a]. More generally, we define a braid to be quasipositive if it is a product of arbitrary conjugates of the standard positive generators, i.e. a product of subwords $w\unicode[STIX]{x1D70E}_{i}w^{-1}$ , which we simply call (positive) bands. An expression of a braid as a word in these bands is called a bandword, and a construction analogous to the one described above associates a ribbon-immersed spanning surface to each bandword.

3.2 Construction of algebraic curves

We now build the desired algebraic curves using a special type of quasipositive band surgery: that is, the addition of a band $w\unicode[STIX]{x1D70E}_{i}w^{-1}$ to a quasipositive braid. This relies on the following lemma, due to Feller [Reference FellerFel16, Lemma 6].

Realization lemma (Feller [Fel16], cf. Orevkov [Ore96], Rudolph [Rud83b]). Let $\unicode[STIX]{x1D6FD}$ and $\unicode[STIX]{x1D6FE}$ be quasipositive $n$ -braid words such that $\unicode[STIX]{x1D6FE}$ can be obtained from $\unicode[STIX]{x1D6FD}$ by applying a finite number of braid group relations, conjugations, and additions of a conjugate of a positive generator anywhere in the braid. Then there exists a polynomial of the form $p(z,w)=w^{n}+c_{n-1}(z)w^{n-1}+\cdots +c_{0}(z)$ and constants $0<r<R$ such that the intersections of $\unicode[STIX]{x1D6F4}=\{p(z,w)=0\}$ with $S_{r}^{3}$ and $S_{R}^{3}$ are isotopic to $\unicode[STIX]{x1D6FD}$ and $\unicode[STIX]{x1D6FE}$ , respectively.

To prove the main theorem, it suffices to adapt the topological construction from § 2 using quasipositive braids and band surgeries.

Proof of Theorem 1.

Let $\unicode[STIX]{x1D6FD}\in B_{n}$ be a quasipositive braid expressed as a product of positive bands $w\unicode[STIX]{x1D70E}_{i}w^{-1}$ . Let $m$ denote the number of singularities in the ribbon-immersed Bennequin surface $F$ for $\unicode[STIX]{x1D6FD}$ . We begin by constructing a quasipositive braid $\unicode[STIX]{x1D6FD}^{\prime }\in B_{n+m}$ that contains $\unicode[STIX]{x1D6FD}$ as a sublink. Each ribbon singularity in $F$ corresponds to a region in the braid as depicted in Figure 4(a) (or its rotation by 180 $^{\circ }$ , with strand orientations reversed); here the dashed strands represent the crossing strands in the positive band and may pass over or under the black strand in the center of the region where the dashed strands are not drawn. After braid isotopy of the crossing strands, we obtain the quasipositive braid in Figure 4(b). We then introduce an additional strand as shown in Figure 4(c); the new strand passes under all others except at the two points shown in the figure. After performing these modifications for each of the $m$ original singularities, we obtain a quasipositive braid $\unicode[STIX]{x1D6FD}^{\prime }\in B_{n+m}$ that contains $\unicode[STIX]{x1D6FD}$ as a sublink. Up to smooth isotopy, $\unicode[STIX]{x1D6FD}^{\prime }$ is obtained from $\unicode[STIX]{x1D6FD}$ by adding $m$ unknots, linked with $\unicode[STIX]{x1D6FD}$ as depicted in Figure 4(d).

Figure 4.

Modifying the original braid (a–c) and its closure (d).

Figure 5.

Band surgery and isotopy of the braid closure.

Next, let $\unicode[STIX]{x1D6FE}\in B_{n+m}$ be the braid obtained from $\unicode[STIX]{x1D6FD}^{\prime }$ by adding a positive generator within each of the $m$ neighborhoods as shown in Figure 5(a). By the lemma, there exists an algebraic curve $\unicode[STIX]{x1D6F4}$ and constants $0<r<R$ such that $\unicode[STIX]{x1D6FD}^{\prime }=\unicode[STIX]{x1D6F4}\cap \unicode[STIX]{x2202}B_{r}^{4}$ and $\unicode[STIX]{x1D6FE}=\unicode[STIX]{x1D6F4}\cap \unicode[STIX]{x2202}B_{R}^{4}$ .

Next we show that $\unicode[STIX]{x1D6FE}$ is an unknot. Through the smooth isotopy depicted in Figure 5(b, c), we see that $\unicode[STIX]{x1D6FE}\in B_{n+m}$ is isotopic to a quasipositive braid $\unicode[STIX]{x1D6FE}^{\prime }\in B_{n}$ whose ribbon-immersed Bennequin surface in fact contains no singularities and is therefore embedded. Observe that this braid $\unicode[STIX]{x1D6FE}^{\prime }$ also has the same number of bands as $\unicode[STIX]{x1D6FD}$ . Since the slice-Bennequin inequality is sharp for quasipositive braids [Reference RudolphRud93, Reference HeddenHed10], the number of bands in $\unicode[STIX]{x1D6FD}$ equals $n+2g_{\ast }(\unicode[STIX]{x1D6FD})-1=n-1$ . It follows that the Bennequin surface for $\unicode[STIX]{x1D6FE}^{\prime }$ has Euler characteristic $-1$ , implying that $\unicode[STIX]{x1D6FE}^{\prime }$ (and thus $\unicode[STIX]{x1D6FE}$ ) is an unknot.

Finally, we show that the compact piece of $\unicode[STIX]{x1D6F4}$ bounded by $\unicode[STIX]{x1D6FE}$ is a holomorphically unknotted disk. For notational convenience, we rescale $\mathbb{C}^{2}$ so that $R=1$ and let $\unicode[STIX]{x1D6F4}_{1}$ denote the resulting holomorphic curve in the unit four-ball. That $\unicode[STIX]{x1D6F4}_{1}$ is a disk follows from the fact that holomorphic curves are genus-minimizing [Reference Kronheimer and MrowkaKM94, Reference RudolphRud93]. To show that $\unicode[STIX]{x1D6F4}_{1}$ is holomorphically unknotted, we employ Eliashberg’s technique of filling by holomorphic disks (as in [Reference Boileau and FourrierBF98, Proposition 2]). The braid $\unicode[STIX]{x1D6FE}$ can be viewed as a transverse unknot (in the contact-geometric sense) with self-linking number $-1$ . It follows that it bounds an embedded disk $D\subset S^{3}$ whose characteristic foliation (see [Reference EtnyreEtn03]) is radial with a single positive elliptic point $p\in D$ . There is a small interval $[0,\unicode[STIX]{x1D716})$ and a family of disjoint holomorphic ‘Bishop disks’ $\unicode[STIX]{x1D6E5}_{t}\subset B^{4}$ for $t\in [0,\unicode[STIX]{x1D716})$ emerging from $p$ such that $\unicode[STIX]{x1D6E5}_{t}$ is properly embedded in $B^{4}$ with boundary in $D\subset S^{3}$ for $t>0$ (and $\unicode[STIX]{x1D6E5}_{0}$ is a degenerate disk identified with the given elliptic point). By [Reference EliashbergEli95, Corollary 2.2B], the Bishop family can be extended to a family of holomorphic disks foliating a three-ball bounded by the piecewise-smooth two-sphere $D\cup \unicode[STIX]{x1D6F4}_{1}$ . In particular, the extended family includes $\unicode[STIX]{x1D6F4}_{1}$ , so $\unicode[STIX]{x1D6F4}_{1}$ can be unknotted through holomorphic disks.◻

Example 3.2. The quasipositive slice knot given by the mirror of $8_{20}$ can be represented by the 3-braid $\unicode[STIX]{x1D6FD}=\unicode[STIX]{x1D70E}_{2}\unicode[STIX]{x1D70E}_{1}^{2}\unicode[STIX]{x1D70E}_{2}\unicode[STIX]{x1D70E}_{1}^{-2}\unicode[STIX]{x1D70E}_{2}^{-1}\unicode[STIX]{x1D70E}_{1,3}$ , which embeds in the 5-braid $\unicode[STIX]{x1D6FD}^{\prime }=w\unicode[STIX]{x1D70E}_{2}w^{-1}\unicode[STIX]{x1D70E}_{1,5}$ , where $w=\unicode[STIX]{x1D70E}_{4}^{-1}\unicode[STIX]{x1D70E}_{3}^{2}\unicode[STIX]{x1D70E}_{4}^{-2}\unicode[STIX]{x1D70E}_{3}^{-1}\unicode[STIX]{x1D70E}_{2}^{-1}\unicode[STIX]{x1D70E}_{1}^{2}\unicode[STIX]{x1D70E}_{2}^{-2}\unicode[STIX]{x1D70E}_{1}^{-1}\unicode[STIX]{x1D70E}_{1}\unicode[STIX]{x1D70E}_{2}$ . Following the above procedure, $\unicode[STIX]{x1D6FD}^{\prime }$ arises as a cross-section of a holomorphic disk in the four-ball bounded by the unknot $\unicode[STIX]{x1D6FE}=w^{\prime }\unicode[STIX]{x1D70E}_{2}w^{-1}\unicode[STIX]{x1D70E}_{1,5}$ , where $w^{\prime }$ is obtained from $w$ by the two replacements $\unicode[STIX]{x1D70E}_{3}^{2}\rightarrow \unicode[STIX]{x1D70E}_{3}\unicode[STIX]{x1D70E}_{4}\unicode[STIX]{x1D70E}_{3}$ and $\unicode[STIX]{x1D70E}_{1}^{2}\rightarrow \unicode[STIX]{x1D70E}_{1}\unicode[STIX]{x1D70E}_{2}\unicode[STIX]{x1D70E}_{1}$ .

Remark 3.3. The construction from the proof above generalizes to show that every quasipositive knot $K$ embeds as a link component in a cross-section of an algebraic curve in the four-ball whose boundary is a strongly quasipositive knot with the same slice genus as $K$ .

Next, we produce the algebraic curves needed for the refined solution to Problem 1.100(A). By [Reference Hirasawa and ShimokawaHS00, Theorem 1.6] (see also [Reference Scharlemann and ThompsonST89]), band surgery decreases the Seifert genus of a knot if and only if the knot has a minimal genus Seifert surface that contains the band. Therefore, to violate the inequality from Problem 1.100(A), we seek pairs of quasipositive braids $\unicode[STIX]{x1D6FD}$ and $\unicode[STIX]{x1D6FE}$ such that $\unicode[STIX]{x1D6FE}$ is obtained from $\unicode[STIX]{x1D6FD}$ by band surgery along a band lying inside a minimal genus Seifert surface for $\unicode[STIX]{x1D6FD}$ .

Proof of Theorem 2.

For each $n\geqslant 0$ , define a pair of four-braids as follows:

$$\begin{eqnarray}\displaystyle \unicode[STIX]{x1D6FD}_{n} & = & \displaystyle \unicode[STIX]{x1D70E}_{1,4}\unicode[STIX]{x1D70E}_{2}(\unicode[STIX]{x1D70E}_{1}^{n}\unicode[STIX]{x1D70E}_{1,3}^{-1}\unicode[STIX]{x1D70E}_{1}^{-n})\unicode[STIX]{x1D70E}_{2,4}(\unicode[STIX]{x1D70E}_{1}^{n}\unicode[STIX]{x1D70E}_{1,3}\unicode[STIX]{x1D70E}_{1}^{-n}),\nonumber\\ \displaystyle \unicode[STIX]{x1D6FE}_{n} & = & \displaystyle \unicode[STIX]{x1D70E}_{1,4}\unicode[STIX]{x1D70E}_{2}\unicode[STIX]{x1D70E}_{2,4}\unicode[STIX]{x1D70E}_{1}^{n}\unicode[STIX]{x1D70E}_{1,3}\unicode[STIX]{x1D70E}_{2}^{n+1}.\nonumber\end{eqnarray}$$

Observe that each $\unicode[STIX]{x1D6FD}_{n}$ is quasipositive and each $\unicode[STIX]{x1D6FE}_{n}$ is strongly quasipositive. Bennequin surfaces for $\unicode[STIX]{x1D6FD}_{0}$ and $\unicode[STIX]{x1D6FD}_{1}$ appear in Figure 3. We can obtain $\unicode[STIX]{x1D6FE}_{n}$ from $\unicode[STIX]{x1D6FD}_{n}$ by adding $2n+2$ positive bands: Adding $\unicode[STIX]{x1D70E}_{1,3}$ in the middle of the term $(\unicode[STIX]{x1D70E}_{1}^{n}\unicode[STIX]{x1D70E}_{1,3}^{-1}\unicode[STIX]{x1D70E}_{1}^{-n})$ in $\unicode[STIX]{x1D6FD}_{n}$ eliminates that entire term, adding $\unicode[STIX]{x1D70E}_{1}^{n}$ to the end of $\unicode[STIX]{x1D6FD}_{n}$ eliminates the term $\unicode[STIX]{x1D70E}_{1}^{-n}$ , and then $\unicode[STIX]{x1D70E}_{2}^{n+1}$ is added to the end of the word. (The final term is added to ensure that $\unicode[STIX]{x1D6FE}_{n}$ is a knot and to simplify the expression of its Seifert genus.) By the lemma, there exists an algebraic curve $\unicode[STIX]{x1D6F4}_{n}$ and constants $0<r<R$ such that $\unicode[STIX]{x1D6FD}_{n}=\unicode[STIX]{x1D6F4}_{n}\cap \unicode[STIX]{x2202}B_{r}^{4}$ and $\unicode[STIX]{x1D6FE}_{n}=\unicode[STIX]{x1D6F4}_{n}\cap \unicode[STIX]{x2202}B_{R}^{4}$ .

It remains to calculate the Seifert genera of $\unicode[STIX]{x1D6FD}_{n}$ and $\unicode[STIX]{x1D6FE}_{n}$ . Since $\unicode[STIX]{x1D6FE}_{n}$ is strongly quasipositive, its Bennequin surface realizes the Seifert genus of $\unicode[STIX]{x1D6FE}_{n}$ ; see [Reference RudolphRud93]. This surface is built from four disks and $5+2n$ bands and has connected boundary, hence has genus $n+1$ . To compute the Seifert genus of $\unicode[STIX]{x1D6FD}_{n}$ , we show that its Bennequin surface is also genus-minimizing. This surface is built from four disks and $5+4n$ bands, hence has Euler characteristic $\unicode[STIX]{x1D712}=-1-4n$ . Since its boundary is a knot, the genus is $(1-\unicode[STIX]{x1D712})/2=2n+1$ . For $n=0$ and $n=1$ , we confirmed that these surfaces are genus-minimizing in Example 3.1. We proceed by induction. Let us assume the Bennequin surface for $\unicode[STIX]{x1D6FD}_{n-1}$ is minimal, where $n\geqslant 2$ . The braid $\unicode[STIX]{x1D6FD}_{n}$ can be viewed as being obtained from $\unicode[STIX]{x1D6FD}_{n-1}$ by four replacements of the form $\unicode[STIX]{x1D70E}_{1}^{\pm 1}\rightarrow \unicode[STIX]{x1D70E}_{1}^{\pm 2}$ . As illustrated in Figure 6, the replacement $\unicode[STIX]{x1D70E}_{1}\rightarrow \unicode[STIX]{x1D70E}_{1}^{2}$ can be viewed as the result of plumbing a positive Hopf band across the $\unicode[STIX]{x1D70E}_{1}$ -band. The replacement $\unicode[STIX]{x1D70E}_{1}^{-1}\rightarrow \unicode[STIX]{x1D70E}_{1}^{-2}$ is analogous, realized by plumbing a negative Hopf band across a $\unicode[STIX]{x1D70E}_{1}^{-1}$ -band. It follows that the Bennequin surface for $\unicode[STIX]{x1D6FD}_{n}$ is obtained from that of $\unicode[STIX]{x1D6FD}_{n-1}$ by repeated Hopf plumbing. Since the Bennequin surface for $\unicode[STIX]{x1D6FD}_{n-1}$ is genus-minimizing, it follows from [Reference GabaiGab83] that the Bennequin surface for $\unicode[STIX]{x1D6FD}_{n}$ is genus-minimizing as well.◻

Figure 6.

Hopf plumbing across a band of like sign.

4 Unknotted Lagrangian disks with nontrivial cross-sections

In this final section, we adapt the construction from § 2 to the Lagrangian setting. We assume the reader is familiar with the basics of Legendrian knot theory and front diagrams for Legendrian links; see, for example, Etnyre’s survey [Reference EtnyreEtn05]. For background on Lagrangian fillings of Legendrian links, see [Reference ChantraineCha10].

We use the following theorem to construct the desired Lagrangian surfaces.

Theorem 4.1 [Reference Bourgeois, Sabloff and TraynorBST15, Reference ChantraineCha10, Reference Ekholm, Honda and KálmánEHK16, Reference Dimitroglou RizellDim16].

If two Legendrian links $L_{\pm }$ in the standard contact $S^{3}$ are related by any of the following three moves, then there exists an exact, embedded, orientable, and collared Lagrangian cobordism from $L_{-}$ to $L_{+}$ .

Isotopy:

$L_{-}$ and $L_{+}$ are Legendrian isotopic.

0-Handle:

The front of $L_{+}$ is the same as that of $L_{-}$ except for the addition of a disjoint Legendrian unknot as in the left side of Figure 7.

1-Handle:

The fronts of $L_{\pm }$ are related as in the right side of Figure 7.

Figure 7.

Diagram moves corresponding to attaching a 0-handle and an oriented 1-handle.

Remark 4.2. A cross-section $\unicode[STIX]{x1D6F4}\cap S_{r}^{3}$ of a Lagrangian surface $\unicode[STIX]{x1D6F4}\subset B^{4}$ is said to be collarable if there exists $\unicode[STIX]{x1D716}>0$ and a family of isotopic Lagrangian surfaces $\unicode[STIX]{x1D6F4}_{t}$ with $\unicode[STIX]{x1D6F4}_{0}=\unicode[STIX]{x1D6F4}$ such that: (i) for all $t\in [0,1]$ , $\unicode[STIX]{x1D6F4}_{t}$ is transverse to $S_{r}^{3}$ and coincides with $\unicode[STIX]{x1D6F4}$ outside $B_{r+\unicode[STIX]{x1D716}}^{4}\setminus \operatorname{int}(B_{r-\unicode[STIX]{x1D716}}^{4})$ ; (ii) the vector field $\unicode[STIX]{x2202}/\unicode[STIX]{x2202}r$ is tangent to $\unicode[STIX]{x1D6F4}_{1}$ near the cross-section $S_{r}^{3}\cap \unicode[STIX]{x1D6F4}_{1}$ .

Example 4.3. Consider the sequences of front diagrams in Figure 8. The implied first step in each sequence is the attachment of some number of 0-handles. Applying Theorem 4.1, part (a) corresponds to a Lagrangian filling of the mirror of the knot $9_{46}$ , which is seen to be a disk because it consists of two 0-handles joined by a single 1-handle. (This sequence is adapted from [Reference Hayden and SabloffHS15, Example 4.1].) Part (b) corresponds to a Lagrangian disk bounded by a Legendrian unknot. Observe that the penultimate front in this sequence depicts a two-component link formed from the knot $11n_{139}$ and an unknot.

Figure 8.

A pair of Lagrangian disks.

Figure 9.

Resolving a ribbon singularity.

To prove Theorem 3, we generalize the construction from part (b) of Figure 8.

Proof of Theorem 3.

Let $K$ be a Legendrian knot that bounds a ribbon-immersed disk in $S^{3}$ whose $n$ ribbon singularities all have the special form depicted on the left side of Figure 9. Moreover, let us assume that the link $L$ obtained by resolving each such singularity as in Figure 9 is an $(n+1)$ -component unlink, each of whose components bounds a Lagrangian disk constructed as in Theorem 4.1. Working in reverse, we can attach 1-handles to this collection of disks to obtain a single Lagrangian disk $\unicode[STIX]{x1D6F4}$ bounded by $K$ . As discussed in Remark 4.4 below, one can readily produce infinitely many knots that fit into this construction.

We claim that $\unicode[STIX]{x1D6F4}$ embeds into an unknotted Lagrangian disk $\unicode[STIX]{x1D6F4}^{\prime }$ . To see this, consider the $(2n+1)$ -component unlink $L^{\prime }$ obtained from $L$ by introducing unknotted components near each ribbon singularity as in the first step of Figure 10. This unlink bounds a collection of $(2n+1)$ Lagrangian disks. By attaching $n$ 1-handles as in the second step of Figure 10, we obtain a collection of $(n+1)$ Lagrangian disks; this collection consists of $\unicode[STIX]{x1D6F4}$ linked with $n$ unknotted disks. Finally, we attach $n$ more 1-handles as shown in the third step of Figure 10, producing a single Lagrangian disk $\unicode[STIX]{x1D6F4}^{\prime }$ . All ribbon singularities of the corresponding ribbon-immersed surface in $S^{3}$ can be eliminated using the isotopy in the final step of Figure 10, so the boundary of $\unicode[STIX]{x1D6F4}^{\prime }$ is an unknot. By construction, $\unicode[STIX]{x1D6F4}^{\prime }$ contains $K$ as a link component in a collared cross-section.

To see that these Lagrangian fillings of the unknot are unknotted as embedded disks in $B^{4}$ , we appeal to work of Eliashberg and Polterovich [Reference Eliashberg and PolterovichEP96] which implies that any two properly embedded Lagrangian disks in $B^{4}$ with collared, unknotted boundary are in fact isotopic through such Lagrangian disks. Therefore, the fillings of the unknot constructed above are isotopic to the standard unknotted filling of the unknot.◻

Figure 10.

Constructing an unknotted Lagrangian disk with a nontrivial cross-section.

Figure 11.

Producing knots that fit into the construction from the proof of Theorem 3.

Remark 4.4. To produce examples of Legendrian knots fitting into the above construction, it can be convenient to start with a Legendrian knot $K^{\prime }$ that can be transformed into a Lagrangian-fillable unlink by applying resolutions of the form depicted in Figure 11. By modifying each of these regions as shown, we obtain a Legendrian knot $K$ which also bounds a Lagrangian disk and fits into the construction from the proof of Theorem 3.

Acknowledgements

I wish to thank Lee Rudolph for bringing these questions to my attention and Eli Grigsby for numerous stimulating conversations about braids and ribbon surfaces. Thanks also to Peter Feller, Patrick Orson, and the anonymous referee for comments on drafts, and to Siddhi Krishna, Clayton McDonald, Jeffrey Meier, and Alexander Zupan for helpful conversations.

References

Birman, J., Ko, K. H. and Lee, S. J., A new approach to the word and conjugacy problems in the braid groups , Adv. Math. 139 (1998), 322–353.Google Scholar
Boileau, M. and Fourrier, L., Knot theory and plane algebraic curves , Chaos Solitons Fractals 9 (1998), 779–792.Google Scholar
Boileau, M. and Orevkov, S., Quasi-positivité d’une courbe analytique dans une boule pseudo-convexe , C. R. Acad. Sci. Paris Sér. I Math. 332 (2001), 825–830.Google Scholar
Borodzik, M., Morse theory for plane algebraic curves , J. Topol. 5 (2012), 341–365.Google Scholar
Bourgeois, F., Sabloff, J. M. and Traynor, L., Lagrangian cobordisms via generating families: construction and geography , Algebr. Geom. Topol. 15 (2015), 2439–2477.Google Scholar
Chantraine, B., On Lagrangian concordance of Legendrian knots , Algebr. Geom. Topol. 10 (2010), 63–85.Google Scholar
Chantraine, B., Some non-collarable slices of Lagrangian surfaces , Bull. Lond. Math. Soc. 44 (2012), 981–987.Google Scholar
Cornwell, C., Ng, L. and Sivek, S., Obstructions to Lagrangian concordance , Algebr. Geom. Topol. 16 (2016), 797–824.Google Scholar
Dimitroglou Rizell, G. , Legendrian ambient surgery and Legendrian contact homology , J. Symplectic Geom. 14 (2016), 811–901.Google Scholar
Ekholm, T., Honda, K. and Kálmán, T., Legendrian knots and exact Lagrangian cobordisms , J. Eur. Math. Soc. (JEMS) 18 (2016), 2627–2689.Google Scholar
Eliashberg, Ya., Topology of 2-knots in R 4 and symplectic geometry , in The Floer memorial volume, Progress in Mathematics, vol. 133 (Birkhäuser, Basel, 1995), 335–353.Google Scholar
Eliashberg, Ya. and Polterovich, L., Local Lagrangian 2-knots are trivial , Ann. of Math. (2) 144 (1996), 61–76.Google Scholar
Etnyre, J. B., Introductory lectures on contact geometry , in Topology and geometry of manifolds, Athens, GA, 2001, Proceedings of Symposia in Pure Mathematics, vol. 71 (American Mathematical Society, Providence, RI, 2003), 81–107.Google Scholar
Etnyre, J., Legendrian and transversal knots , in Handbook of knot theory (Elsevier, Amsterdam, 2005), 105–185.Google Scholar
Feller, P., Optimal cobordisms between torus knots , Comm. Anal. Geom. 24 (2016), 993–1025.Google Scholar
Fiedler, T., Complex plane curves in the ball , Invent. Math. 95 (1989), 479–506.Google Scholar
Gabai, D., The Murasugi sum is a natural geometric operation , in Low-dimensional topology, San Francisco, CA, 1981, Contemporary Mathematics, vol. 20 (American Mathematical Society, Providence, RI, 1983), 131–143.Google Scholar
Gordon, C. McA., Ribbon concordance of knots in the 3-sphere , Math. Ann. 257 (1981), 157–170.Google Scholar
Hass, J., The geometry of the slice-ribbon problem , Math. Proc. Cambridge Philos. Soc. 94 (1983), 101–108.Google Scholar
Hayden, K., Quasipositive links and Stein surfaces, Preprint (2017), arXiv:1703.10150.Google Scholar
Hayden, K. and Sabloff, J. M., Positive knots and Lagrangian fillability , Proc. Amer. Math. Soc. 143 (2015), 1813–1821.Google Scholar
Hedden, M., Notions of positivity and the Ozsváth–Szabó concordance invariant , J. Knot Theory Ramifications 19 (2010), 617–629.Google Scholar
Hirasawa, M. and Shimokawa, K., Dehn surgeries on strongly invertible knots which yield lens spaces , Proc. Amer. Math. Soc. 128 (2000), 3445–3451.Google Scholar
Kirby, R., Problems in low-dimensional topology , in Geometric topology, AMS/IP Studies in Advanced Mathematics, vol. 2, ed. Kazez, W. H. (American Mathematical Society, Providence, RI, 1997), 35–473.Google Scholar
Kronheimer, P. B. and Mrowka, T. S., The genus of embedded surfaces in the projective plane , Math. Res. Lett. 1 (1994), 797–808.Google Scholar
Orevkov, S. Yu., Rudolph diagrams and analytic realization of the Vitushkin covering , Mat. Zametki 60 (1996), 206–224, 319.Google Scholar
Rudolph, L., Braided surfaces and Seifert ribbons for closed braids , Comment. Math. Helv. 58 (1983), 1–37.Google Scholar
Rudolph, L., Algebraic functions and closed braids , Topology 22 (1983), 191–202.Google Scholar
Rudolph, L., A congruence between link polynomials , Math. Proc. Cambridge Philos. Soc. 107 (1990), 319–327.Google Scholar
Rudolph, L., Quasipositivity as an obstruction to sliceness , Bull. Amer. Math. Soc. (N.S.) 29 (1993), 51–59.Google Scholar
Scharlemann, M. and Thompson, A., Link genus and the Conway moves , Comment. Math. Helv. 64 (1989), 527–535.Google Scholar
Figure 0

Figure 1.Embedding one ribbon-immersed surface in another, simpler one.

Figure 1

Figure 2.Band surgeries on unlinks and the corresponding ribbon surfaces.

Figure 2

Figure 3.Bennequin surfaces for the braids $\unicode[STIX]{x1D6FD}_{0}$ (left) and $\unicode[STIX]{x1D6FD}_{1}$ (right).

Figure 3

Figure 4.Modifying the original braid (a–c) and its closure (d).

Figure 4

Figure 5.Band surgery and isotopy of the braid closure.

Figure 5

Figure 6.Hopf plumbing across a band of like sign.

Figure 6

Figure 7.Diagram moves corresponding to attaching a 0-handle and an oriented 1-handle.

Figure 7

Figure 8.A pair of Lagrangian disks.

Figure 8

Figure 9.Resolving a ribbon singularity.

Figure 9

Figure 10.Constructing an unknotted Lagrangian disk with a nontrivial cross-section.

Figure 10

Figure 11.Producing knots that fit into the construction from the proof of Theorem 3.