Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T00:26:20.617Z Has data issue: false hasContentIssue false

An analysis of the boundary layer in the 1D surface Cauchy–Born model∗

Published online by Cambridge University Press:  31 July 2012

Kavinda Jayawardana
Affiliation:
Department of Mathematics, University College London, Gower Street, WC1E 6BT London, UK. k.guruge@ucl.ac.uk
Christelle Mordacq
Affiliation:
École Normale Supérieure de Cachan, Antenne de Bretagne, Avenue Robert Schuman, 35170 Bruz, France; Christelle.Mordacq@gmail.com
Christoph Ortner
Affiliation:
Mathematics Institute, Zeeman Building, University of Warwick, CV4 7AL Coventry, UK; c.ortner@warwick.ac.uk
Harold S. Park
Affiliation:
Boston University, Department of Mechanical Engineering, 730 Commonwealth Avenue, ENA 212, Boston, 02215 MA, USA; parkhs@acs.bu.edu

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The surface Cauchy–Born (SCB) method is a computational multi-scale method for the simulation of surface-dominated crystalline materials. We present an error analysis of the SCB method, focused on the role of surface relaxation. In a linearized 1D model we show that the error committed by the SCB method is 𝒪(1) in the mesh size; however, we are able to identify an alternative “approximation parameter” – the stiffness of the interaction potential – with respect to which the relative error in the mean strain is exponentially small. Our analysis naturally suggests an improvement of the SCB model by enforcing atomistic mesh spacing in the normal direction at the free boundary. In this case we even obtain pointwise error estimates for the strain.

Information

Type
Research Article
Copyright
© EDP Sciences, SMAI, 2012