Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T08:04:37.309Z Has data issue: false hasContentIssue false

Boundary control and shape optimization for the robust designof bypass anastomoses under uncertainty

Published online by Cambridge University Press:  17 June 2013

Toni Lassila
Affiliation:
Modelling and Scientific Computing, Mathematics Institute of Computational Science and Engineering, École Polytechnique Fédérale de Lausanne, Station 8, EPFL, 1015 Lausanne, Switzerland.. toni.lassila@epfl.ch; alfio.quarteroni@epfl.ch
Andrea Manzoni
Affiliation:
Now at SISSA MathLab, International School for Advanced Studies, Via Bonomea 265, 34136 Trieste, Italy.; andrea.manzoni@sissa.it; gianluigi.rozza@sissa.it
Alfio Quarteroni
Affiliation:
Modelling and Scientific Computing, Mathematics Institute of Computational Science and Engineering, École Polytechnique Fédérale de Lausanne, Station 8, EPFL, 1015 Lausanne, Switzerland.. toni.lassila@epfl.ch; alfio.quarteroni@epfl.chMOX, Modellistica e Calcolo Scientifico, Dipartimento di Matematica F. Brioschi, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy.; alfio.quarteroni@polimi.it
Gianluigi Rozza
Affiliation:
Now at SISSA MathLab, International School for Advanced Studies, Via Bonomea 265, 34136 Trieste, Italy.; andrea.manzoni@sissa.it; gianluigi.rozza@sissa.it

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

We review the optimal design of an arterial bypass graft following either a (i) boundaryoptimal control approach, or a (ii) shape optimization formulation. The main focus isquantifying and treating the uncertainty in the residual flow when the hosting artery isnot completely occluded, for which the worst-case in terms of recirculation effects isinferred to correspond to a strong orifice flow through near-complete occlusion.Aworst-case optimal control approach is applied to the steady Navier-Stokes equations in 2Dto identify an anastomosis angle and a cuffed shape that are robust with respect to apossible range of residual flows. We also consider a reduced order modelling frameworkbased on reduced basis methods in order to make the robust design problem computationallyfeasible. The results obtained in 2D are compared with simulations in a 3D geometry butwithout model reduction or the robust framework.