Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T03:22:25.903Z Has data issue: false hasContentIssue false

A stabilized Lagrange multiplier method for the enriched finite-element approximation of contact problems of cracked elastic bodies

Published online by Cambridge University Press:  03 February 2012

Saber Amdouni
Affiliation:
Laboratoire LAMSIN, École Nationale d’Ingénieurs de Tunis, Université Tunis El Manar, B.P. 37, 1002 Tunis-Belvédère, Tunisia. Saber.Amdouni@insa-lyon.fr ; maher.moakher@enit.rnu.tnUniversité de Lyon, CNRS, INSA-Lyon, ICJ UMR5208, 69621 Villeurbanne, France
Patrick Hild
Affiliation:
Laboratoire de Mathématiques de Besançon, CNRS UMR 6623, Université de Franche-Comté, 16 route de Gray, 25030 Besançon Cedex, France; patrick.hild@univ-fcomte.fr
Vanessa Lleras
Affiliation:
Institut de Mathématiques et de Modélisation de Montpellier, CNRS UMR 5149, Université de Montpellier 2, Case courrier 51, Place Eugène Bataillon, 34095 Montpellier Cedex, France; vlleras@math.univ-montp2
Maher Moakher
Affiliation:
Laboratoire LAMSIN, École Nationale d’Ingénieurs de Tunis, Université Tunis El Manar, B.P. 37, 1002 Tunis-Belvédère, Tunisia. Saber.Amdouni@insa-lyon.fr ; maher.moakher@enit.rnu.tn
Yves Renard
Affiliation:
Université de Lyon, CNRS, INSA-Lyon, ICJ UMR5208, LaMCoS UMR5259, 69621 Villeurbanne, France; Yves.Renard@insa-lyon.fr

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The purpose of this paper is to provide a priori error estimates on the approximation of contact conditions in the framework of the eXtended Finite-Element Method (XFEM) for two dimensional elastic bodies. This method allows to perform finite-element computations on cracked domains by using meshes of the non-cracked domain. We consider a stabilized Lagrange multiplier method whose particularity is that no discrete inf-sup condition is needed in the convergence analysis. The contact condition is prescribed on the crack with a discrete multiplier which is the trace on the crack of a finite-element method on the non-cracked domain, avoiding the definition of a specific mesh of the crack. Additionally, we present numerical experiments which confirm the efficiency of the proposed method.

Information

Type
Research Article
Copyright
© EDP Sciences, SMAI, 2012