Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T20:23:45.353Z Has data issue: false hasContentIssue false

Melt fracture revisited

Published online by Cambridge University Press:  13 August 2001

J. M. GREENBERG
Affiliation:
Department of Mathematical Sciences, Carnegie Mellon University, Pittsburgh, PA 15213, USA
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In a previous paper the author and Demay advanced a model to explain the melt fracture instability observed when molten linear polymer melts are extruded in a capillary rheometer operating under the controlled condition that the inlet flow rate was held constant. The model postulated that the melts were a slightly compressible viscous fluid and allowed for slipping of the melt at the wall. The novel feature of that model was the use of an empirical switch law which governed the amount of wall slip. The model successfully accounted for the oscillatory behavior of the exit flow rate, typically referred to as the melt fracture instability, but did not simultaneously yield the fine scale spatial oscillations in the melt typically referred to as shark skin. In this note, a new model is advanced which simultaneously explains the melt fracture instability and shark skin phenomena. The model postulates that the polymer is a slightly compressible linearly viscous fluid but assumes no-slip boundary conditions at the capillary wall. In simple shear the shear stress τ and strain rate d are assumed to be related by d = Fτ, where F ranges between F2 and F1 > F2. A strain-rate dependent yield function is introduced and this function governs whether F evolves towards F2 or F1. This model accounts for the empirical observation that at high shears polymers align and slide more easily than at low shears, and explains both the melt fracture and shark skin phenomena.

Information

Type
Research Article
Copyright
2001 Cambridge University Press