Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T04:44:45.680Z Has data issue: false hasContentIssue false

Suppression of drill-string stick–slip vibration by sliding mode control: Numerical and experimental studies

Published online by Cambridge University Press:  18 May 2018

VAHID VAZIRI
Affiliation:
Centre for Applied Dynamics Research, School of Engineering, University of Aberdeen, Aberdeen AB24 3UE, UK emails: vahid.vaziri@abdn.ac.uk, marcin.kapitaniak@abdn.ac.uk, m.wiercigroch@abdn.ac.uk
MARCIN KAPITANIAK
Affiliation:
Centre for Applied Dynamics Research, School of Engineering, University of Aberdeen, Aberdeen AB24 3UE, UK emails: vahid.vaziri@abdn.ac.uk, marcin.kapitaniak@abdn.ac.uk, m.wiercigroch@abdn.ac.uk
MARIAN WIERCIGROCH
Affiliation:
Centre for Applied Dynamics Research, School of Engineering, University of Aberdeen, Aberdeen AB24 3UE, UK emails: vahid.vaziri@abdn.ac.uk, marcin.kapitaniak@abdn.ac.uk, m.wiercigroch@abdn.ac.uk
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

We investigate experimentally and numerically suppression of drill-string torsional vibration while drilling by using a sliding mode control. The experiments are conducted on the novel experimental drill-string dynamics rig developed at the University of Aberdeen (Wiercigroch, M., 2010, Modelling and Analysis of BHA and Drill-string Vibrations) and using commercial Polycrystalline Diamond Compact (PDC) drill-bits and rock-samples. A mathematical model of the experimental setup, which takes into account the dynamics of the drill-string and the driving motor, is constructed. Physical parameters of the experimental rig are identified in order to calibrate the mathematical model and consequently to ensure robust predictions and a close agreement between experimental and numerical results for stick–slip vibration is shown. Then, a sliding mode control method is employed to suppress stick–slip vibration. A special attention is paid to prove the Lyapunov stability of the controller in presence of model parameter uncertainties by defining a robust Lyapunov function. Again experimental and numerical results for the control cases are in a close agreement. Stick–slip vibration is eliminated and a significant reduction in vibration amplitude has been observed when using the sliding controller.

Information

Type
Papers
Copyright
Copyright © Cambridge University Press 2018