Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T23:40:30.672Z Has data issue: false hasContentIssue false

EVALUATION OF SIMPLE HAND-HELD MECHANICAL SYSTEMS FOR HARVESTING TEA (CAMELLIA SINENSIS)

Published online by Cambridge University Press:  10 March 2006

P. J. BURGESS
Affiliation:
Cranfield University, Silsoe, Bedfordshire, MK45 4DT, UK
M. K. V. CARR
Affiliation:
Cranfield University, Silsoe, Bedfordshire, MK45 4DT, UKTea Research Institute of Tanzania, P.O. Box 2177, Dar-es-Salaam, TanzaniaCrop and Water Management Systems (Intnl) Ltd, Pear Tree Cottage, Frog Lane, Ilmington, Shipston-on-Stour, Warwickshire, CV36 4LG, UK
F. C. S. MIZAMBWA
Affiliation:
Tea Research Institute of Tanzania, P.O. Box 2177, Dar-es-Salaam, TanzaniaTPC Ltd., PO Box 93, Moshi, Tanzania
D. J. NIXON
Affiliation:
Cranfield University, Silsoe, Bedfordshire, MK45 4DT, UKBooker-Tate Ltd, Masters Court Church Road, Thame, Oxon, OX9 3FA
J. LUGUSI
Affiliation:
Tea Research Institute of Tanzania, P.O. Box 2177, Dar-es-Salaam, Tanzania
E. I. KIMAMBO
Affiliation:
Tea Research Institute of Tanzania, P.O. Box 2177, Dar-es-Salaam, Tanzania
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Over an eight-year period, harvesting methods based on simple mechanical aids (blade and shear) were evaluated against hand harvesting on mature morphologically contrasting tea clones in Southern Tanzania. The effects of shear step height (5–32 mm) and the harvest interval (1.8–4.2 phyllochrons) were also examined. Except in the year following pruning, large annual yields (5.7–7.9 t dry tea ha−1) were obtained by hand harvesting at intervals of two phyllochrons. For clones K35 (large shoots) and T207 (small shoots), the mean harvested shoot weights were equivalent to three unfurled leaves and a terminal bud. The proportions of broken shoots (40–48 %) and coarse material (4–6 %) were both relatively high. Using a blade resulted in similar yields to hand harvesting from K35 but larger yields from T207 (+13 %). The yield increase from clone T207 was associated with the harvest of more shoots and heavier shoots, smaller increases in canopy height, and a higher proportion (7–9 %) of coarse material compared to hand harvesting. On bushes, which had been harvested by hand for two years following pruning, using flat shears (no step) supported on the tea canopy resulted, over a three year period, in yields 8–14 % less than those obtained by hand harvesting and, for clone K35, a reduction in the leaf area index to below 5. The development of a larger leaf area index is made possible by adding a step to the shear. However, since annual yields were reduced by 40–50 kg ha−1 per mm increase in step height, the step should be the minimum necessary to maintain long-term bush productivity. As mean shoot weights following shear harvesting were about 13 % below those obtained by hand harvesting, there is scope, when using shears, to extend the harvest interval from 2 to 2.5 phyllochrons.

Information

Type
Research Article
Copyright
2006 Cambridge University Press